Process filter airsorb 3

gasfumeoil mist

Storage filters of the airsorb3 assembly are used in manufacturing plants to extract and safely separate gases*, fumes, odors*, proportional dusts (airsorb3 model) at processing machines. In addition, these units can also be used to extract aerosols and oil mists (airsorb3fd model). Due to the large dimensioned filter systems, long filter service lives result. *) only with activated carbon filter The puristic and modern design of the ASPUR devices is also reflected in this device group. During development, care has been taken to ensure that access to all areas is as extensive as possible. All filters can therefore be replaced within a very short time. G4 coarse filters in a plastic frame and retaining plate and aluminum mesh filters are coarse pre-separators and spark arrestors, respectively. Both filters can be easily removed and reinserted. The main filter system consists of an F9 filter (airsorb3 model) or fogdrain filter (airsorb3fd model) and H14 filter or H14 filter with integrated coalescence filter and can be pulled out very easily from its final position. The drawer system developed for this purpose is protected as a utility model. The filters can be completely extended and removed or replaced from the holder. After insertion of the filter pack, they are automatically brought into the end position and sealed. Thanks to the modular design, a wide variety of prefilters and main filters such as HEPA filters, activated carbon filters, demister filters, G4 filters, F9 filters, and Fogdrain filters can be used or combined.