Parking barrier

securityaccessextendable

Overview
Our automatic rising barrier is designed to control vehicle access to a secured area. It opens only when the user is authorized and can be coupled with one or several control systems (badge, plate recognition, remote control, etc.) as well as vehicle presence loops. Its reliable brushless drive enables continuous daily operation without cycle limitation.

Applications
Suitable for traffic management in car parks, shopping centers, restricted access points and residential zones.

Operation
Controlled by an electronic board with an integrated detector for 1 to 2 loops (second loop with free output). The barrier can be integrated into various control systems and paired with presence detectors for activation or protection within the arm movement area.

Technical features (table)
Electric drive — Brushless motor type SWIFTDRIVE, derived from industrial robotics (brushless); 230 V – 253 W – 1.1 A
Opening speed — 4 adjustable speeds for rise and descent; Arm length 3 m: minimum 1.1 s | Arm length 5.5 m: minimum 3 s
Octagonal arm with articulated joint — Aluminum 1.5 mm thickness; exterior paint for outdoor use in white with red reflective strips; arm extension joints; LED status strip (green: arm open / red: arm closed); rest fork included for 5 m width
Column, design and finish — Dimensions: 272 mm x 256 mm; hot-dip galvanized steel for outdoor use; powder-coated finish resistant to UV; standard column white with blue cap or RAL paint finish optional
Manual lifting — Mechanical lever
Locking — Mechanical in the lowered position
Options — Audible alarm; pedestrian safety: infrared collision detection cell; radio/Bluetooth/GSM receiver for opening by remote, badge or mobile; motion or vehicle presence detector for activation/protection of the arm movement zone

Key benefits

• High-duty use and high speed thanks to the brushless motor: unlimited daily cycles without overheating risk.
• 4 adjustable speeds (opening/closing - from 1.1 to about 3 seconds depending on arm length).
• Smooth operation and safety: dynamic braking, soft stop of the arm and reversal in case of blockage; possibility to add presence detectors for user protection.
• Integrated backup power: 12 V battery providing approximately 20 maneuvers in case of power loss.
• Easy installation: small footprint, reduced civil works.

Specifications / technical data

• Motor: Brushless SWIFTDRIVE (brushless) — 230 V / 253 W / 1.1 A
• Opening speeds: 4 adjustable speeds; 3 m = ≥1.1 s; 5.5 m = ≥3 s
• Arm: octagonal aluminum 1.5 mm; exterior white paint; red reflective strips; LED status strip (green/red); rest fork for 5 m
• Column: 272 x 256 mm; hot-dip galvanized steel; UV-resistant powder coating; standard color column white/blue cap or RAL finish optional
• Manual lifting: mechanical lever
• Locking: mechanical in lowered position
• Options: audible alarm; infrared anti-collision cell; radio/Bluetooth/GSM receiver; motion/vehicle presence detectors
• Backup power: 12 V battery — approx. 20 maneuvers
• Control: electronic board with integrated detector for 1 to 2 loops (free output on 2nd loop)