DIRECTLY HEATED DRUM DRYERS FOR CHIPS, OSB STRANDS AND OTHER BIOMASS PRODUCTS
Büttner's single-pass dryer is efficient, versatile and robust
Büttner's directly heated drum dryers are distinguished by their diverse heating possibilities, efficiency and ruggedness. These single-pass dryers are utilised for drying wood chips, OSB strands, beet pulp as well as all types of free-flowing wood material, biomass products and other bulk solids.
Depending on the product, a water evaporation capacity of up to 80 t/h
Heated directly by multi-fuel burners in combustion chambers
Heated directly by flue gas from energy systems
Heated directly by exhaust gases from turbines or motors
Any combination of these heating methods is possible
For high moisture content levels, a flash tube dryer can be attached
to pre-dry and separate coarse materials
Product separation takes place by means of cyclones or drop box
Products designated for drying come in through an air-tight rotary valve and into the rotating single-pass dryer drum. The dryer drum is equipped with specific internals, depending on the type of product. This results in an increase in surface area and with it, an increase in efficiency.
The product is transported slowly through the dryer drum, by the internals of the dryer drum and the flow of the hot gases. Hot gases from the dryer flow around the product in a continuous current, heat it up and remove the moisture. After a product has passed through the dryer drum, cyclones separate it from cooled down and moist dryer gases. Dependent on the product and systems involved, mechanical pre-separation with a drop box is also available for use.