Passive splitter DP-34045-3-000

pre-wiredsignalIP69K

The passive, plus-switching output splitter (PNP) with 4-pin AT connections is ideally suited for connecting actuators such as hydraulic valves to the control system by plugging them in. The 18-pole trunk line connection offers space for up to 16 signals. There is a double GND supply on each slot. Whether an output signal is switched or not can be easily recognized by the yellow I/O LEDs per slot. The signals from pins 13, 14, 15 and 16 are internally bridged and fed out again on pins 7 and 8. The splitter is IP67 tested and designed for the harsh environment in mobile machines. Mechanical Data Dimensions - 97 x 265 x 34 mm Weight - 680 g Material (Housing) - PA, reinforced CAN / Sensor / Module Connector - DT-18 (A-cod.) IO connector - DT-4 Electrical Data Operating Voltage - 8 … 32 V DC Operating Current per Contact / Potential (max.) - 13 A Sum Current (max.) - 26 A Block diagnoses - Undervoltage | Overvoltage | Overtemperature LED Indicators - Signal: yellow Outputs Total number of outputs - bis zu 16 | up to 16 Environmental Conditions Protection Class - IP67 | IP68, IP69K (with MDC cordsets) Ambient temperature - -40 °C…+80 °C Storage temperature - -40 °C…+85 °C Standards & Approvals EMC - RoHS Directive 2011/65/EU Line: - xtremeLine Housing Material: - plastic Port Number: - 10 Connection: - DT-4 Inputs: - up to 16 Outputs: - up to 16 LED: - yes Auxiliary Voltage: - 12 / 24 V Signal Type: - Digital