High current pneumatically actuated finger contact saddles 500 - 5000 A
for clamping of product carriers of different thickness without the need to change the contact setting
Please also note our cleaning systems matched to our contacts according to the catalogue pages 43-48.
High current pneumatically actuated finger contact saddles for
clamping of product carriers of different thickness without the
need to change the contact setting (dimension difference in
thickness max. 10 mm). This ensure safe operation both in
the event of product carrier wear and when product carriers
of different thickness are used. Therfore this contact series is
equipped with a pneumatically actuated clamping force support.
Each individual contact finger is actuated and pressed
separately against the product carrier. The contact pressure
required for contacting is generated by two small stainless steel
pistons per contact finger. Air pressure required 4-6 bar.
Available both with and without mounted stainless steel A4
protective covers.
Protective covers protect the contact saddles from acid and
alkali splashes and thus extend the service life of the contact
units. The standard designs are delivered mounted on an
E-copper plate and adjusted to the product carrier dimension.
On request, mounting on an angle and the delivery of an additionally mounted insulating plate is also possible. For applications
where power feed via a base plate or angle is not possible or
disadvantageous, the power can also fed in via straight or
angled power connection bars leading out to the front, as shown
in the following photo. Detailed informations are available on
request.