Conical mandrel bending tester Model 312

for metal sheetsfor coatingindustrial

The mandrel bending test is a commonly used testing method for assessing the flexibility and the adhesion properties of coatings when these are subjected to bending stresses. The conical mandrel bending tester, model 312, complies with the standards specified on the front page.

Test principle

• Testing with the conical mandrel bending tester determines the largest diameter of the cone at which the coating shows cracking or flaking after bending.

Design

• The conical mandrel bending tester, model 312, is a compact, robust instrument made of enamelled steel which is suitable for table-top use.
• The conical mandrel and the pivoted pressure roller running parallel to the surface of the cone are made of stainless steel.
• The clamping device is equipped with a cam lever which ensures rapid and uncomplicated change of specimens.

Test procedure

• The bending lever is turned towards the clamp until it reaches the stop.
• The test sheet – with the coated side outward – is inserted between the cone and the pressure roller into the clamping device and pushed to the limit at the end of the cone with the smaller diameter.
• The specimen is secured in position using the cam lever.
• The specimen is then bent by turning the bending lever around the mandrel in a smooth movement taking 2 to 3 seconds.
• The coating is then examined for cracking (flaking).
• The test result is either the length of cracking, measured from the fine end of the mandrel, or the diameter of the mandrel at the end of the crack.

Scope of delivery

• Conical Mandrel Bending Tester Model 312

Standards

• ISO 6860
• EN ISO 6860
• ASTM D 522

Technical data

• Dimensions: 250 x 140 x 420 mm (L x W x H)
• Net weight: 5.6 kg
• Conical mandrel: 1/8 - 1 1/2 (3.2 - 38.1 mm)
• Specimen thickness: 1/32" (0.79 mm)
• Max. specimen width: 190 mm
• Portable / Stationary: Portable