Grinding hydraulic chuck HYDRO-GRIP B

for woodworking

Sleeve for interchangeable tool assembly, the same basic construction as the BI type, with a thread and locking nut. This means the sleeve can be easily switched between different tools. Several tools can be mounted to the same sleeve. Pressurizing is carried out with a high pressure grease pump. This allows the use of longer sleeves. Thread and locking nut: The knurled ring nut only needs to be lightly tightened so the tools are in contact with each other. Tightening the three screws in the ring nut ensures that the tools are safely and accurately fixed into position. This allows you to maintain the accuracy achieved on the grinding machine when you move the sleeve and tool assembly to the spindle on your production machine. Interchangeable assembly: A tool with a hole tolerance of H7 gives an easy slip fit on sleeves meant for interchangeable tool assembly. When pressurized the sleeve expands against the spindle, thus eliminating any play between the tool and spindle. Tolerances: ETP HYDRO-GRIP is intended for machine spindle tolerance g6 and tool tolerance H7. Benefits & Features Well establish design with thread and locking nut. Several tools can be mounted on the same sleeve. Perfect centering and fastening of your tools. Pressurizing is carried out with a high pressure pump.