Identification system CIT3PL1N30-STA

Read-only head CIT3 with parallel interface, axial connection • Parallel interface • Cylindrical design M30 • M12 plug connector • Axial connection • Mounting instructions On mounting the read head and data carrier, it is to be ensured the crossing direction as per the direction of the arrow on the active face of the read head is observed. The Identification System CIS3 is the predominantly used standard system in the CIS system family. The CIS3 features compact data carriers. Typical applications are, for example, the coding of circulating product carriers or larger tools. The data carriers are screwed on the product to be identified, or the round design is bonded in a countersunk hole. The antenna and the interface electronics are fully integrated in the read heads and the read/write head. The data carrier and the head contain rod antennas. This configuration requires mounting with the same orientation of the head and data carrier. This orientation can be seen from a printed arrow marking. This fact means that the data carrier must approach the head in the direction of the arrow. The data carriers can be read when static or even moving at relative speed in front of the read head, i.e. on moving past. As a result the system is suitable, for instance, for moving product carriers. The data carriers must always be written statically.