Spray cleaning machine, HURRICANE SR1200D have been designed to perform in a single chamber washing, rinsing and drying of machined and not machined products.
Products can be in metal and not metal material, having different dimension, geometry and weight. Machine is built entirely in INOX AISI 304 (EN 1.4301).
HURRICANE SR1200D is a compact machine; it can be used for a final cleaning such as for a pre-cleaning. Machine is equipped with two tanks, one for detergent solution and one for rinsing liquid.
Machine and tanks are properly insulated to contain heat dispersion.
Used detergent is water based.
Cleaning process uses swirling jets of detergent solution in washing and rinsing phases.
Once detergent is expired it has to be replaced manually.
Drying is done by hot air also recirculated in a swirling movement throughout the cleaning chamber.
Machine is loaded manually.
Product are located in dedicated frames/baskets and then these frames/baskets are pushed into the cleaning chamber
Cleaning process is customizable, it can include all or part of the following phases:
1. - Spray washing with detergent, close loop.
2. - Rinsing close loop
3. - Rinsing with or without oxidation inhibitor open circuit
4. - Hot air drying
Operator can easily enable or disable each of the cleaning process phases such as can customize cycle time of each phase or set liquids temperatures.
HURRICANE SR1200D single chamber has a chamber useful dimension of 1200x1200x1200 mm and load up to 800 Kg product. Cycle time depend of product type, of quality and amount of dirty to remove, in average it takes 15-20 minutes.