Anti-corrosion product SEILFETT TW

Overview
Highly adhesive lubricant and anti-corrosive for wire ropes and use as automobile cavity protection and underbody coating.

Product details
SEILFETT TW contains a solvent. After evaporation of the solvent, a thin, firm film forms on the surface. The formulation is adjusted to low viscosity for easy processing. When applied correctly, treated surfaces are reliably protected against corrosion. SEILFETT TW can be applied at room temperature by spraying, dipping, or brushing on cleaned metal surfaces. Ideal application temperature is approximately 25–35 °C. Film formation occurs after 2–8 hours with sufficient air circulation. Surface temperature must be at least 3 °C above the dew point.

Application

• Spraying
• Dipping
• Brushing on cleaned metal surfaces

Storage
Store sealed in the original container at max. +30 °C. If stored below +10 °C, warm to 30 °C and homogenize before use.

Variants / Packaging

• 1 L — Item No. 720001
• 5 L — Item No. 720005
• 600 ml (spray) — Item No. 720600

Documents

• Technical data sheet (TDS) — English
• Safety data sheet (SDS) — English

Technical characteristics

• Brand: EUROLUB
• Product name: SEILFETT TW
• Contains solvent; forms a thin, firm protective film after solvent evaporation
• Low viscosity for easy processing
• Protects treated surfaces against corrosion when applied correctly
• Recommended application temperature: 25–35 °C
• Film formation time: approximately 2–8 hours with sufficient air circulation
• Surface temperature requirement: at least 3 °C above the dew point
• Storage: sealed in original container, max. +30 °C; if stored < +10 °C, warm to 30 °C and homogenize before use