5-way hydraulic block 5BDHF series

steelcast ironpolyurethane

Product overview
5-line blocks increase machine versatility by grouping five quick-couplings in a single casting: two 1/2" couplings, two 3/4" couplings for high-flow applications and one 3/8" coupling for drain lines. The blocks connect to the machine hydraulic circuit via two input ports. Hydraulic decompression of the 1/2" lines is performed through the same patented system used on the 3-port auxiliary line blocks, while decompression of the 3/4" lines is manual. Items listed here are off-the-shelf products requiring no additional design development or production-tool investment.

Applications

• Construction equipment

Items (Male & Female)

• Part number: 5BDHF0812-13/34S
  Thread: 1-1/16"-12 UN MALE JIC
  2 x Couplings 3/4": 1-1/16"-12 UN MALE JIC - ISO 8434-2
  Flow Rate (3/4"): 146 l/min at 0.2 MPa
  2 x Couplings 1/2": 1-1/16"-12 UN MALE JIC - ISO 8434-2
  Flow Rate (1/2"): 69 l/min at 0.2 MPa
  L1 (Length Uncoupled): 222.1 mm
  L2 (Length Coupled): 202.5 mm
  Temperature range: -25 °C to 100 °C
  Seals: NBR & PUR
  Weight: 10000 g
  Housings: 5
  Couplings: 5
• Part number: 5BDHF0812-11/1S
  Thread: 1-7/16"-12 UN MALE ORFS
  2 x Couplings 3/4": 1-7/16"-12 UN MALE ORFS - ISO 8434-3
  Flow Rate (3/4"): 146 l/min at 0.2 MPa
  2 x Couplings 1/2": 1-7/16"-12 UN MALE ORFS - ISO 8434-3
  Flow Rate (1/2"): 69 l/min at 0.2 MPa
  L1 (Length Uncoupled): 218 mm
  L2 (Length Coupled): 202.5 mm
  Seals: NBR & PUR
  Weight: 10600 g
  Housings: 5
  Couplings: 5

Accessories & Spares

• KIT 4BD-FFH06M — Steel — Size: 10 mm (3/8")
• KIT 4FH08 F — Steel — Size: 12.5 mm (1/2")
• KIT 4FH08 M — Steel — Size: 12.5 mm (1/2")

Seal kits

• SK FFH06 — for 10 mm (3/8")
• SK FFH08 — for 12.5 mm (1/2")

Safety warning
This product can expose you to chemicals such as Lead or Nickel which are known to the State of California to cause cancer and birth defects or other reproductive harm.

Technical specifications

• Material: Cast Iron & Steel
• Seals: NBR & PUR
• Working temperatures: -25 °C to 100 °C
• Surface treatment: MATE 500 (CrIII) & MATE 1000 (ZnNi)
• Series Interchange: ISO 16028
• Valve Type: Flat
• Connection: Push to Connect
• Disconnection: Sleeve Retraction
• Connection Under Pressure: Allowed both halves up to working pressure
• Burst / performance (by dash size)
  Dash 08 (12.5 mm): Working Pressure 35 MPa; Flow Rate 69 l/min at 0.2 MPa; Spillage 0.01 ml; Force to connect 200 N; Male / Female / Male+Female burst pressures: 100 MPa
  Dash 12 (19 mm): Working Pressure 35 MPa; Flow Rate 146 l/min at 0.2 MPa; Spillage 0.02 ml; Force to connect 215 N; Male / Female / Male+Female burst pressures: 100 MPa