Hydraulic adapter FCS 306130
drill pipethreadextended

hydraulic adapter
hydraulic adapter
hydraulic adapter
Add to favorites
Compare this product


drill pipe
Connector type
Other characteristics

32 in


10 in


FCS MODEL 306130 The Foremost Floating Cushion Sub is designed to be installed on Rotary Drilling Rigs below the gear box and into the drive spindle by means of a threaded connection. The Cushion Sub will reduce vertical shock transmitted by the bit while drilling using either DTH Hammer or Rotary Drilling methods. The two and one half inches (2 1/2”) of free – floating travel of the Piston allows the drill operator to make-up and break-out threaded connections with minimal flank loading on the threads of the drill pipe or casing. This float within the housing enables the drill operators to make-up casing threads with little or no thread damage when stabbing the connections together or taking them apart. The sub can be used in vertical and or slant drilling applications. The Foremost Floating Cushion Sub is available with all popular thread configurations up to a pin or box shoulder diameter of 7” at the top end and a 6” shoulder diameter pin or box on the lower end. Generally the extended length of 32.5” shoulder to shoulder and housing diameter of 10” do not interfere with drilling or pipe handling operations. FUNCTION & OPERATION The pin / box connection on the Upper Cap assembly is made up directly to the drive spindle, while the box / pin connection on the Piston is free to move axially within the Body cavity. A stationary wash pipe and seal arrangement isolate drilling fluids / air from the inner components of the body. The piston will either extend or retract within the cushion sub body if the drill string is held stationary and the drive spindle rotated to breakout or makeup the threads in the drill string.


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.