Transimpedance amplifier PLL-1701

linearlogarithmic

High Speed transimpedance amplifier and digital data sampler The PLL-1701 optometer is designed for two different types of fast optical measurements with two different amplifier modes (linear or logarithmic). The device incorporates a small integrating sphere and detector for the measurement of optical power from fibers (FC connector) in W over the wavelength range 400 nm to 1550 nm. The measurement results can be output either directly as an analogue voltage (BNC) or as digital data via USB or RS422 interface. The pure analogue measurement conversion (transimpedance) to the BNC is with a speed of 200000 Samples/s suitable for very fast measurement purposes. The digital measurement is only limited by the transmission speed of USB and RS422 (100kHz).Instead of the integrating sphere measurement, an external detector can be used with the provided BNC current-input. The device itself can be configured by the two remote interfaces. Flicker measurements The fast sampling rate enables flicker evaluation of lighting products. The standard flicker metrics Pst, SVM, Mp, Flicker frequency, Flicker index and Flicker percent are all implemented in the available software. 16 µs or 500 µs rise time linear amplifier The PLL-1701 linear signal amplifier offers fixed rise times of either16 µs or 500 µs for all gain ranges which can be set by remote commands. The total gain range of the current to voltage amplifier is divided in nine ranges in order to achieve an optimal signal to noise ratio. logarithmic amplifier The PLL-1701 also offers a logarithmic amplifier which covers the whole dynamic range with one amplifier gain range.