Rotary tablet press ZP-17D

This ZP17D is a rotary tablet type high-pressure tablet press manufactured and developed by our RQ company. The maximum operating pressure of the tablet press of this machine is 100KN, and it can also be set to 60KN and 80KN depending on the number of upper and lower dies added. This ZP17D is a high-pressure and rotary tablet press manufactured and developed by our RQ Group factory. When this ZP17D tablet press is running, the maximum operating pressure of the tablet press is 100KN, and at the same time,17D can be set to 60KN and 80KNbased on the number of molds added. Stable structure and chain conveyor belt in ZP17D. The integrated box base makes the ZP17D very stable during operation, and the use of chain conveyor belts enables the power of the motor to be transmitted without reservation. Turntable made of integrated cast iron of ZP17D. The turntable with very high hardness releases the internal stress for a long time, so that the 17D can run stably for a long time. Pressure protection device and aviation-grade power plug in ZP17D. All electrical components are hidden inside the machine, and they are all international brands, which are safe and stable. According to the number of molds, finished tablets with different diameters can be manufactured. Under the pressure of 100KN, we can use ZP17D to manufacture finished tablets with a length of 40 mm. And if there are 21 molds, then the production speed of ZP17D will increase, the data is 37,550 pieces per hour. Then the diameter of the product manufactured by the corresponding tablet press becomes smaller, and the data is 12MM.