Forming motor spindle DGZ-06260／1.2A2-PW

machiningmotorizedwater-cooled

It is mainly used for denture forming. The main processing materials are Pre-Milled Blank (Titanium),Zirconia,Lithium Disilicate, Nanocomposite, PMMA, PEEK, Wax. 1、High precision Spindle static jumping is ≤0.002mm, tapered bore jumping is≤0.001mm. It has high dynamic precision and stability of spindle during machining, which can effectively ensure the stability and consistency of the workpiece dimension. 2、High speed The max. speed of spindle can reach up to 60000rpm. The resection rate of material is greatly improved during machining. In actual use, the speed can be improved appropriately to ensure the machining efficiency according to the abrasion of the cutter. 3、High degree of finish The roughness of finished surface is only Ra0.05, and the surface finish is remarkable. 4、Ultralong nose Easy to solve the problems such as denture groove of traditional spindle is difficult to be machined and the cutter is vulnerable to be broken, etc. 5、High energy conservation and cooling Air cooling is adopted, with the min. gas flow of 30L/min and the min. air pressure of 0.05mpa. The lower the calorific value is, the lower the cooling gas flow will be. 6、Ultralong service life, high stability Air curtain seal can prevent the dust and coolant from entering the bearing during machining, which can effectively avoid the spindle faults. The spindle is equipped with the motor temperature control sensor to monitor the spindle temperature in machining process in real time. The high precision ceramic ball bearings of famous brands can ensure long and reliable operation of the spindle.