Servomotors with natural air cooling. Mechanics with flange in square case of 200mm and 5 body lengths. Stall torque in service S1 not self-cooled from 30 Nm to 117 Nm. Power connection through terminal box, signal connection through M23 connector.
Type
- Synchronous permanent magnet servomotor ( brushless )
Rotor
- rare earth permanent magnets ( NdFeB )
Insulation
- winding, class H; Motor Class F
Winding
Standard
- winding for 400VAC
On demand
- other combinations of voltage and speed possible.
Insulation -
- winding in classH
- motor in class F
- Insulation suitable for 400VAC voltage
Thermal protection sensors
Standard
- PTC
Optional
- KTY84 only on some type
Cooling system
- natural air ( IC0041 )
Standard Protection
- IP54 - The IP65 protection on the shaft side must be requested and is considered effective only in the presence of an oil bath coupling or with the presence of lubricant.
Ballbearing
- ball bearings with double screen lubricated for life
Balancing
- Grade "R"
Concentricity and perpendicularity of the axis / flange
- grade "N" (normal) - according to IEC 72 - DIN0530
Shaft output
- with key, with coaxial threaded hole
Brake
- optional. Permanent magnet parking brake, 24VDC power supply with specific polarity. Brake engaged in the absence of power. Braking torque greater than the motor Tn
- Brake not suitable for dynamic stops. He can tolerate a limited number of emergency braking
- Due to the power dissipated by the brake, we recommend derating the motor stall torque by 5% - optional. Permanent magnet parking brake, 24VDC power supply with specific polarity.