Workbench + metal cabinet with curtain, screen-printed or perforated wooden panel for tools. Painted in hammered blue, kiln dried before degreasing and phosphating. Work top in sheet metal, medium (MDF) or chestnut 50mm thick. Made of sheet metal with four longitudinal reinforcements welded by resistance, 2 mm thick, which gives it great rigidity. In medium or chestnut with 2 holes drilled and milled in each of the four corners allow to fix the feet on the work surface. Depending on the length of the worktops, drawers of different sizes can be attached. (see catalogue). Bottom plate made of 2 mm thick sheet metal with four screw fixing holes on the feet. Two sets of 2mm thick sheet metal legs to fix the work surface and support the lower shelf. 4 Anti-slip vulcanized rubber levelling bases. Metal cabinet with curtain and screen-printed or perforated wooden panel for tools. Structure in 1mm thick sheet metal, all welded by resistance painted in hammered blue colour, dried in the oven before degreasing and phosphating. 0.6mm thick sheet metal curtain, mounted on the cabinet structure by means of a spring system that compensates the rise and fall of the cabinet. Laminated chipboard panel on both sides, with screwed supports for fastening tools. The silhouette of the tool screen printed with high resistance ink to the most common oils and greases. Panel with 10mm perforation and 15mm between centres. Plastic handle embedded in the metal profile. 110 series supports included for screen-printed wood panel and 145 10 1 series supports not included for perforated panel.