Retroreflective photoelectric sensor PD series

rectangularinfraredLED

Converting distance data to analog! Provided comparator output Features -> This sensor is an optical distance sensor with infrared ray. -> This sensor provides comparator output(2 output) that can set optional distance value and alarm output that executes at the out of detectable area. -> This sensor provides light-emission stop output for preventing interference. Power source - 24VDC(±10%, ripple 10% or less) Current consumption - 125mA or less Detecting distance - 0.2 to 10m(when using specified reflector) Repeatability - ±100mm Absolute accuracy - ±200mm Hysteresis - 300mm Resolution - 40mm Comparator output(OUT 1,2) - NPN open-collector output(30VDC, 50mA or less), OFF when it is within detection distance Input - Contact or transistor input, Stop to emit by shorting to -VIN(0V)(Alarm lamp lights up) Lamps - Power lamp(Green LED) : Lights up when putting power source on Alarm output lamp(Red LED) : Lights up when alarm output is getting OFF Comparator output lamp(Orange) : Lights up when it is within detection distance Directional angle - ±2.5° Response time - 50msec or less*2 Connection - Cable 1m long Ambient illuminance - Halogen and incandescent lamp : 10,000lx or less, fluorescent lamp : 6,000lx or less Ambient temperature/humidity - -10 degrees C to +50 degrees C, 85%RH or less(Not icing) Vibration resistance - 10 to 55Hz Double amplitude 1.5mm Each 2 hour in X, Y and Z directions Impact resistance - 490m/s2 Each 10 time in X, Y and Z directions Case - Polycarbonate Weight - Sensor : approx. 200g, RRP-100 : approx. 65g