Signal amplifier IsoPAQ-632
isolationsplittervoltage output

signal amplifier
signal amplifier
Add to favorites
Compare this product
 

Characteristics

Type
signal
Secondary function
isolation, splitter
Other characteristics
voltage output, current output
Voltage

Min.: 1 V

Max.: 10 V

Current

Min.: 0 mA

Max.: 20 mA

Description

Signal Splitter/Repeater with double outputs for mA and V signals The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters. The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary. The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply. • - Calibrated signal setting via DIP switch Input and outputs can be set by using DIP switch – high precision without any further adjustment • - 4-Port isolation Protection against erroneous measurements due to parasitic voltages or ground loops • - Extremely slim design 6.2 mm slim housing for a simple and space saving DIN rail mounting • - Optional In-Rail-Bus mounting rail connector Allows for fast and economical installation • - Protective Separation acc. to EN 61140 Protects service personnel and downstream devices against impermissibly high voltage • - Maximum reliability No maintenance costs

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.