Internal conveyor systems, particularly suited for cost-efficient implementation of gravity or push conveyors. Can also be used in the food processing sector. The grease used in the bearings is FDA-compliant.
High corrosion resistance
The rollers consist of stainless material. Upon request, it is also possible to use stainless steel balls.
Resistant to contamination
The smooth surfaces protect against dirt accumulation.
The tube ends are rounded, thereby allowing materials to be easily moved on from the side.
For axial fixation of the bearing housing, the bearing assemblies for PVC tubes starting at a diameter of 30 mm are secured with an internal press-in edge in addition to the press fit.
General technical data
Max. load capacity 350 N
Max. conveyor speed 0.3 m/s
−5 to +40 °C PVC tube: With increased ambient temperature (from +30 °C) and high continuous static load over hours, a permanent deformation of the rollers cannot be ruled out.
Zinc-plated steel, stainless steel, aluminum PVC: RAL7030 (stone gray) RAL7024 (dark gray) for Ø 20 mm RAL5015 (sky blue) for Ø 50 mm
Uncoated steel, zinc-plated steel, stainless steel
Polypropylene: RAL9005 (jet black) RAL7024 (dark gray) for tube with Ø 20 mm
Polypropylene: RAL1021 (rape yellow) for use of carbon steel balls RAL7030 (stone gray) for use of stainless steel balls RAL7024 (dark gray) for use of stainless steel balls at Ø 20 mm
Special ball bearing made of polypropylene with steel balls (carbon steel or stainless steel)