Motion detector OT570900

presencepeoplepower

sensor optical, Presence detector, 58x49x208mm, 12-24V AC/DC, 2x Relay contact NC/NO, Cable with connector 10m, IP54, Plastic Motion and presence detectors - Presence detector Radar sensors are used primarily as signal transducers for controlling automatic doors and gates. They detect the movement of persons and/or industrial trucks and, at the same time, are insensitive to soiling. Objects can be detected depending on their movement direction in order to optimize the opening cycles of the gates. In doing so, it is possible to mask out people so that the sensor responds only when vehicles approach. Furthermore, it is possible to eliminate interference caused by moving objects within the detection range of the sensor. Systems that are also equipped with presence detection monitor the area in front of a gate in order to prevent the gate leaf from coming into contact with vehicles or objects. Electrical features Turn-off delay 0.3 - 1ms Betriebsspannung (AC 50Hz) 12 - 24V Number of switching outputs 2 Power consumption 2,5VA Switching voltage 42V Type of electrical connection Cable with connector Setting via remote control yes Holding time 0.3 - 1s Betriebsspannung (DC) 12 - 24V Rated switching current 100mA Reaction time 200ms Type of switching function Normally closed contact/normally open contact Type of switching output Relay contact Setting procedure Parameterization Mechanical features Installation height 2,000 - 4,000mm Ambient temperature -25 - 55°C Width 208mm Cable length 10m Optimum mounting height 3m Mounting method Surface mounted (plaster) Housing material Plastic Inclination angle -7 - 4° Number of cores 8 Height 58mm Length 49mm Color Black