Axial extensometer 3475

transverseminiature

These very lightweight extensometers are self-supporting on the test sample. They are used for measuring transverse or diamétral strain. Often they are used simultaneously with an Epsilon axial strain measuring extensometer to détermine Poisson' s ratio. They also are used for characterizing materials with anisotropic properties, such as with many composite materials. This model clips easily onto the sample with an intégral spring to hold the unit in place. It can be adjusted to work on any size sample from 0 to 25 mm (1 inch) width or diameter. The Model 3475 has an arm thickness of only 3.81 mm (0.15 inches), and will work simultaneously with any axial extensometer having sufficient clearance between arms (not ail versions of the 3442 miniature extensometer can be used). Large radius contacts prevent the unit from digging into the samples. This model utilizes Epsilon' s dual flexure design, allowing use in dynamic applications. Ali units hâve measuring ranges in both directions. The Model 3475 extensometers are strain gaged devices, making them compatible with any electronics designed for strain gaged transducers. Most often they are connected to a test machine controller. The signal conditioning electronics for the extensometer is typically included with the test machine controller or may often be added. In this case the extensometer is shipped with the proper connector and wiring to plug directly into the electronics. For Systems lacking the required electronics, Epsilon can provide a variety of solutions, allowing the extensometer output to be connected to data acquisition boards, chart recorders or other equipment.