Electric actuator M3/...-500: 250N/LA/EV1/AC

lineartie-rodAC

Operated with 230 V mains voltage and is therefore without ballast unit Potential-free contact for message "Not CLOSED" (contact closes when leaving position CLOSED) Technical data Electrical properties Rated voltage 230 V AC/50 Hz (-15 %/+10 %) Nominal current approx. 0.2 A Cut-off electronic load cut-off, built-in Class of protection II Mechanical properties Stroke length aprox. 82, 300, 500 and 750 mm Pressure force max. 500 N Tractive force max. 250 N Locking force 2000 N Running speed approx. 10 mm/s Duty cycle ED 30 (10 min) Service life > 10.000 cycles Dimension (L x W x H) (stroke + approx. 133 mm) x 82.5 x 41 mm; Minimum istallation length 433 mm Electrical connection Connection 5 x 0.75 mm², legth approx. 1.60 m, grey Installation and ambient conditions Ambient temperature range –5 °C up to +75 °C Protection category IP 44 Depending on the control panels used, increased currents in the starting torque must be taken into account when dimensioning the power supply and the cable cross-sections of the motor supply lines. Reliable operation is guaranteed when connected to appropriate control units from the same manufacturer. For operation on control systems from other manufacturers, conformity for functional safety must be requested. The drives are equipped with an integrated switching power supply for operation on 230 V AC mains voltage. Suitable switching and relay contacts must therefore be used to control the drives.