DC actuators

Stroke : 50 mm - 400 mm
Force: 3,500, 7,000 N
Speed: 3.8 m/s - 30.6 m/s

The LA42 actuator offers reliable performance with a push load of up to 7,000 N and a dynamic pull of up to 3,500 N. Its customisable motor housing allows flexible placement, while the IPX6 rating ensures it withstands ...

Stroke : 40 mm - 605 mm
Force: 0 N - 8,000 N

... healthcare applications, combining power, precision, and adaptability. KA30: Engineered for excellence, the KA30 linear actuator delivers a formidable lifting capacity of up to 8,000 N while maintaining minimal noise ...

Stroke : 25 mm - 30 mm
Force: 2,500, 3,500 N
Speed: 0 mm/s - 16 mm/s

... enables the LA10 actuators to ‘share intelligence’. This means that the order/sequence of daisy-chained actuators is irrelevant. The second they are connected they know their position in the chain. Only ...

Stroke : 50 mm - 1,000 mm
Force: 0 N - 4,000 N
Speed: 3 mm/s

... : ≥ 230mm IP rating: IP69K Stroke: 50~1000mm Output signals: Mechanical pot., Hall sensors Voltage: 12/24V DC; 12/24V DC (PTC) Operational temperature range: -25˚C ~ +65˚C Operational ...

Stroke : 20 mm - 1,000 mm
Force: 4,500, 2,500 N
Speed: 0 mm/s - 14.3 mm/s

... equipment and off road vehicles. This linear actuator has been certified for applications requiring IP69K compliance. Available options for the MA1 linear actuator include AC or DC ...

Stroke : 25 mm - 1,000 mm
Force: 0 N - 2,000 N
Speed: 0 mm/s - 5.5 mm/s

... PGMA (note 2) to achieve the following functionality. -Set up the actuator’s stroke and speed -Multiple signal feedbacks support -Monitor real-time actuator status -Up to 8 actuator ...

Stroke : 450, 100 mm
Force: 2,000, 4,000, 6,000 N
Speed: 54, 15 mm/s

Electrak® LL Linear Actuators Designed for long life, high duty cycle and the ability to work in the harshest environments, these smart electric linear actuators with brushless ...

Stroke : 50 mm - 300 mm
Force: 2,000, 500, 250, 1,000 N
Speed: 28, 7, 14.5, 52 mm/s

Designed as a smaller sibling to the Electrak HD actuator, these smart electric linear actuators pack a big punch relative to their compact size and dutifully perform in the harshest ...

Stroke : 50 mm - 300 mm
Force: 0 N - 800 N
Torque: 0 Nm - 2 Nm

The new Thomson Max Jac® linear actuator is one of the most rugged actuators you can find on the market today. It incorporates decades of experience Thomson has gained from making linear actuators ...

Stroke : 30 mm
Force: 40 N
Speed: 40 m/s - 100 m/s

Compact linear actuators with absolute encoder for DC power supply DR series Features Battery-free absolute sensor No external sensors required Compact and lightweight EtherCAT, ...

Stroke : 17, 20 mm
Pressure: 5 bar - 10 bar
Ambient temperature: 0 °C - 60 °C

... a pneumatic actuator. In all the versions mentioned below, the valve seat is slanted at an angle of approx. 40° in relation to the medium flow. The flow direction is determined by the design of the valve (angle seat ...

Stroke : 50 mm - 400 mm
Force: 50 N - 650 N
Speed: 125 mm/s - 460 mm/s

Simple, dynamic positioning: The electric actuator EPCO in three sizes has a ball screw actuator with ideally matched motor. And performance can be further improved with the guide unit ...

Force: 500 N - 2,000 N
Torque: 0.15 Nm - 5 Nm
Ambient temperature: 0 °C - 50 °C

... bearing makes it extremely precise. • Electric rotary actuator with stepper motor and built-in gearbox • ServoLite – closed-loop operation with encoder • Heavy-duty bearing for high forces and torques • ...

Torque: 14, 6, 10 Nm

... max. ø20 mm, feather key groove at ø14 mm """manual"" traveling without control unit by means of operator keys" Brushless 160 W, 24 V DC motor with long service life Integrated absolute position encoder ...

Torque: 6, 10, 14 Nm

... Stainless steel hollow shaft up to max. ø20 mm """manual"" traveling without control unit by means of operator keys" Brushless 160 W, 24 V DC motor with long service life Integrated absolute position ...

Stroke : 50 mm - 700 mm
Force: 4,000 N - 8,000 N
Speed: 12.7 mm/s

... • Spindle supplied as standard • Safety factor of up to 4 times The MAX-1 and MAX-3 are powerful and very quiet DC linear actuators, take up little space and can be installed at virtually every angle ...

Stroke : 50 mm - 500 mm
Force: 8 kN - 12 kN
Speed: 8 mm/s

... operating devices available • Back up nut as standard • High safety factor The Runner is a very compact and powerful linear actuator up to 12 000 N, targeting high load applications for medical devices. The series ...

Stroke : 30 mm - 250 mm
Force: 3,500 N
Speed: 7.5 mm/s

... following IEC 60601-1 • Integrated Quick Release function • Self locking and stability function The CAJA 35C linear actuators is a unique series with integrated Quick Release in order to provide a CPR - Cardio Pulmonary ...

Stroke : 50 mm - 2,500 mm
Rod diameter: 15 mm - 100 mm
Force: 7 kN - 450 kN

... customers’ requirements. Compatible with a wide range of motors. Shock resistance, longer lifespan compared with roller screw actuator. Easy operation in any environment.

Stroke : 40 mm - 2,000 mm
Force: 400 N - 200,000 N
Speed: 4 mm/s - 134 mm/s

... to work in bad industrial environment. Acme Screw Linear Actuator LAP Series (duty cycle 30%) and ball screw Linear Actuator LBP series (100% duty cycle ) Linear actuator driven by 12/24/36/48 ...

Stroke : 30 mm - 1,000 mm
Force: 4 kN - 7 kN
Speed: 1.2 mm/s - 1,400 mm/s

Linear actuator for solar tracking system Load capacity 4000kg,suitable for large solar photovoltaic bracket and drive device. SPECIFICATION Voltage: 24V Maximum dynamic load: 40,000N Maximum static load: ...

Force: 5 N - 80 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 5 mm
Force: 30 N - 340 N

... Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. • External linear actuator. Nut are mounted on lead screw. • Captive (will be available for ...

Rod diameter: 6 mm
Force: 50 N - 620 N

... • Captive linear actuator with built-in guider for linear movements. Moving part do not rotate. • Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed. ...

Stroke : 50 mm - 400 mm
Force: 0 N - 700 N
Torque: 0.25 Nm

... screw version » Easy position configuration (PI Motor) » Several Bus-Interfaces available » Very long lifetime LINEAR ACTUATOR, SERIES CASM Continuous stall forces: up to 5400 N* Peak forces: up to 5400 N* Stroke ...

Stroke : 100 mm - 600 mm
Force: 0 N - 1,400 N
Torque: 0.64 Nm

The CASM series is notable for: Twist protected thrust rod In-Line and parallel motor version Compact design Maintenance free Lead and ball screw version Easy position configuration (PI Motor) Several Bus-Interfaces available Very ...

Stroke : 50 mm - 800 mm
Force: 0 N - 5,400 N
Torque: 1.16 Nm

... screw version » Easy position configuration (PI Motor) » Several Bus-Interfaces available » Very long lifetime LINEAR ACTUATOR, SERIES CASM Continuous stall forces: up to 5400 N* Peak forces: up to 5400 N* Stroke ...

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 156 mm/s

The LD1000C linear actuator is ideal for the digitalization and control of vehicles, machines and building sections. It is extraordinarily robust and strong: The thrust force is up to 10,000 N and the stroke length reaches ...

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 130 mm/s

... and resistant linear actuator The LD1000E has a robust housing made of die-cast aluminium with a stable casing made of anodized aluminium profile and a lift pipe made of stainless steel. Inside, there ...

Stroke : 100 mm - 600 mm
Force: 6,000, 4,000 N
Speed: 0 m/s - 0.02 m/s

Intelligent linear actuator with high force The LD600 linear actuator is a very smart and powerful actuator that has been specially designed for indoor and outdoor use. The linear actuator ...

Stroke : 12, 24 mm

Motorized Actuators (GCM-6101) are offered with varying travel by a stepping motor. They have compact structure and stable operation. They can provide precise positioning accuracy and be used with GCM-T series high-precision ...

Force: 20 N
Speed: 0.3 mm/s - 100 mm/s

The size 6 [14mm] hybrid linear actuator occupies a mounting footprint of 14mm square but provides over 20N of continuous thrust force. Size 6 hybrid stepper linear actuator has two form factors available ...

Stroke : 20 mm - 150 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 20mm series is compact and reliable structure of linear solution. DLM 20mm Series is good precision, ...

Stroke : 20 mm - 250 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 28mm series is compact and reliable structure of linear solution. DLM 28mm Series is good precision, ...

Stroke : 50 mm - 400 mm
Force: 3,000, 4,000, 6,000 N
Speed: 4 mm/s - 21 mm/s

... dimensions with different weight） • Static bending moment: lateral loads are not allowed. JC35L30 is a durable yet quiet actuator. It has rich specifications and can be used to both push and pull applications. JC35L30 ...

Stroke : 25 mm - 1,000 mm
Force: 70 N - 1,000 N
Speed: 5 mm/s - 90 mm/s

... • Weight: 1kg（differences in stroke/installation dimension） • Static bending moment: no lateral load JC35W8 is an actuator with low noise level, compact structure and small sizes. It has below models of JC35W8-1000N; ...

Stroke : 50 mm - 250 mm
Force: 1,000, 2,000, 3,000 N
Speed: 5 mm/s - 22 mm/s

... installation dimensions with different weight) • Static bending moment: lateral load is not allowed JC35W2-2 is an improved actuator from JC35W2. Remaining its robust and compact structure, JC35W2-2 is rated up ...

Stroke : 13 mm
Force: 30 N
Speed: 3 mm/s

M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...

Stroke : 8 mm
Force: 30 N
Speed: 3 mm/s

M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...

Stroke : 10 mm
Force: 70 N
Speed: 4 mm/s

M-Thrust series precision actuators offer backlash-free motion of the shaft up to 25 mm travel range. Precision motion is accomplished by a miniature DC servo with rotary encoder or stepper motor providing ...

Stroke : 50 mm - 500 mm
Force: 1,500, 2,500, 4,000 N
Speed: 5, 10, 20 mm/s

Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose from, Gammadrive ...

Stroke : 25 mm - 50 mm
Force: 25 N
Speed: 0 m/s - 0.03 m/s

Zaber’s X-NA-E Series are miniature, motorized linear actuators with 25 N thrust and 30 mm/s speed capabilities in a compact size. Available in either 25 or 50 mm travel, these actuators are designed ...

Stroke : 10 mm
Force: 200 N
Speed: 0 m/s - 1 m/s

The AQUARIUS ST is the new generation of ETEL’s short stroke actuators primarily dedicated to “Test & Scan” turret handler applications. Compared to its predecessor the AQUARIUS one, the ST series allows a higher force ...

Stroke : 10 mm
Force: 12.1 N - 68.4 N
Speed: 0 m/s - 1 m/s

The TUCANA ST is the new generation of ETEL’s short stroke actuators primarily dedicated to “Test & Scan” turret handler applications. Compared to its predecessor the TUCANA one, the ST series allows a higher force control ...

Torque: 1.3 Nm
Motor power: 400 W

... well-known principles of physics.This actuator, very contained in size, is suitable for welding small size pieces, where the use of conventional systems is inconvenient because of size and elevated costs. The brushless ...