DC actuators

Stroke : 1 mm - 1,000 mm
Force: 1.7 kN - 100 kN
Motor power: 30 W - 3,000 W

... Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application. 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100). Wide range of linear ...

Stroke : 900, 600, 150 mm
Force: 15.6, 11.1, 6 kN
Speed: 833, 500, 666 mm/s

... connection with external motors FTX Series planetary electric roller screw actuators: performance & service Roller screw actuators have several advantages over hydraulic or pneumatic actuators ...

Stroke : 50 mm
Speed: 1.7 mm/s

... MD842 is a linear actuator assembly designed to interface with traditional stereotaxic instruments using a 5/16" rod clamp. It features a stable aluminum probe/pipette holder mounted to the actuator's non-rotating push ...

Stroke : 50 mm - 1,500 mm
Force: 2.5 kN - 213.7 kN
Speed: 292 mm/s - 2,167 mm/s

... Wide range of solutions for each electrical application. Various system-modulated solutions for speed and payload based on situations, with thrusts greater than 200kN, high duration and electronic control. In-line or parallel motorization ...

Stroke : 25 mm - 50 mm
Force: 25 N
Speed: 0 m/s - 0.03 m/s

... Zaber’s X-NA-E Series are miniature, motorized linear actuators with 25 N thrust and 30 mm/s speed capabilities in a compact size. Available in either 25 or 50 mm travel, these actuators are designed to replace the standard ...

Stroke : 25, 12 mm
Force: 50 N
Speed: 0.3, 0.1 m/s

... •non-rotating tip, servo / DC motor with encoder CHARACTERISTICS •non-rotating tip •Hall-effect or mechanical limit switches •2-phase geared step motor or DC geared motor with encoder •deformation-resistant aluminium •reflection-poor, ...

Stroke : 50 mm - 2,500 mm
Rod diameter: 15 mm - 100 mm
Force: 7 kN - 450 kN

... customers’ requirements. Compatible with a wide range of motors. Shock resistance, longer lifespan compared with roller screw actuator. Easy operation in any environment. ...

Rod diameter: 35 mm
Force: 1,500, 800 N
Speed: 10, 6, 13 mm/s

... Just 35mm body diameter. Up to 1.500N. Smooth design ideal for in-view applications Duty cycle S3 10% based on 10 min. • Encoder • Increased IP • Customizable stroke and retracted length ...

Stroke : 50 mm - 750 mm
Force: 120 N - 5,400 N
Speed: 3 mm/s - 33 mm/s

... Our small bestseller is now also available as easyE-35i with integrated controller, the intelligent inline actuator solution.The perfect addition without compromising on design and efficiency. The integration of the controller results ...

Stroke : 13 mm
Force: 10 N - 30 N
Speed: 0 mm/s - 1.5 mm/s

... Linear Actuator for Applications in Ultra-High-Vacuum and Cryogenic Environment Technical Details • 2-phase stepper motor, size 25 mm • Motor voltage 24 VDC • Linear speed 1.5 s/mm • Linear stroke 13 mm • Positioning accuracy ...

Stroke : 400 mm
Force: 1,000, 3,000 N
Speed: 0 mm/s - 42 mm/s

... profile ensures stability and reliability for all JLDQ.14B movements. The versatile single drive features maintenance-free 24 V DC motors. ...

Stroke : 100 mm - 600 mm
Force: 3, 5, 7.5 kN
Motor power: 170, 40 W

... The RACO COMPACT electric actuators realizes a high adjustment force with a simple, robust design. As with the heavy duty electric actuators, the principle is purely electromechanical! The ...

Force: 1,000 N - 3,700 N
Speed: 0.01 m/s - 0.04 m/s

... Motor drive for through going spindle 4778 Powerful 24 V DC motor with worm gear, designed for non-rotating through going spindle for pushing and pulling movements. A cable with AMP plug and an integrated Hall sensor allows easy ...

Stroke : 50 mm - 400 mm
Force: 0 N - 700 N
Torque: 0.25 Nm

... screw version » Easy position configuration (PI Motor) » Several Bus-Interfaces available » Very long lifetime LINEAR ACTUATOR, SERIES CASM Continuous stall forces: up to 5400 N* Peak forces: up to 5400 N* Stroke lengths:50 – ...

Stroke : 1,000 mm
Force: 0.6 kN - 350 kN
Speed: 1.4 mm/s - 140 mm/s

... Lubrication with synthetic grease (gearbox long life lubricated, screw drive regreasable). ATL Series acme screw drive linear actuators: 11 standard sizes available Acme screw from Ø 13,5 mm to Ø 120 mm Linear speed from 1,4 mm/s ...

Stroke : 2 in - 7.8 in
Torque: 50 ft.lb - 900 ft.lb
Operating Temperature: -13 °C - 122 °C

... explosion-proof (EdF type) DC (Eg type) Magnetek offers the Ed type of 60 Hz actuator in 208VAC, 230/460VAC and 575VAC three phase versions. Other voltages from 110VAC to 690VAC, 50 Hz versions, explosion proof and ...

Bore: 28 mm - 150 mm
Torque: 9 Nm - 270 Nm
Motor power: 50 W - 3,000,000 W

... Hollow rotary table is sometimes known as Hollow Rotary Actuator, Programmable Servo Rotary Table and Hollow Shaft Rotary Indexer. A mechanical device, hollow rotary tables are used in several industrial applications to allow objects ...

Stroke : 57 mm - 108 mm
Force: 2,300 N
Speed: 12 mm/s

... Linear Actuators ANT-63 A powerful electric actuator designed for yacht trim tabs. Precision-engineered for quiet operation, the Antuator trim tab actuator combines a non-hydraulic, ...

Force: 15 N - 40 N
Torque: 0.8, 3 Nm
Operating Temperature: -10 °C - 70 °C

... compact design • Maximum flexibility due to alignment as vertical or horizontal design (PSD 41) and the optional rotatable actuator housing • Galvanically separated supply voltages for control and power electronics • Optional gearbox ...

Stroke : 50 mm - 500 mm
Force: 4,000, 1,500, 2,500 N
Speed: 5, 10, 20 mm/s

... Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose from, Gammadrive can easily be ...

Stroke : 300, 500 mm
Force: 500 N
Rod length: 300 mm - 750 mm

... VdS-certified For use in SHE- and SPS-systems Technical data Electrical properties Rated voltage 24 V DC (-20 % /+30 %) Permissible ripple voltage 2 Vss Nominal current 0.9 A Cut-off integrated, ...