Electric actuator LD1000C

linearstainless steelanodized aluminum

General
The LD1000C electric linear actuator provides high-force linear motion for outdoor and industrial applications. Thrust/pull force up to 10,000 N and stroke lengths from 15 mm to 1000 mm. The integrated controller reduces the need for external control electronics while enabling precise, repeatable positioning in harsh environments.

Communication & Control
Integrated controller with CAN communication interface for direct control from embedded systems and PLCs. Firmware updates and parameter configuration available via CAN. Supports digital and analogue inputs for simple integration and direct control by single-board computers or microcontrollers when required.

Feedback & Positioning

• Final position feedback (digital outputs)
• Absolute displacement measuring system (absolute position)
• Analogue position feedback (configurable)
• High-resolution digital position feedback via CAN (>4,700 steps per revolution)

Parameters accessible via CAN include operating voltage, motor current, position and status information.

Customisation & Options

• Programmable movement profiles and configurable speeds (factory or software configurable)
• Custom stroke lengths (factory or customer-configurable via CAN)
• Selectable suspension/adapters/couplings and custom bore hole options
• Custom housing colours/paints and installation dimensions
• Control alternatives: CAN, handset or digital signals
• Operating voltage variants available (12 VDC, 24 VDC; up to 48 VDC on request)
• Optional overload clutch and manual emergency actuation
• Custom cable lengths and connector options (M12 standard)

High quality & Environmental Resistance
Die-cast aluminium housing with anodised aluminium profile; lift tube and rod ends in stainless steel; maintenance-free DC motor. Protection class IP69K (static) permits high-pressure/steam cleaning. Resistant to UV, salt spray and strong vibration typical for off-highway and marine applications. Operational ambient temperature: -20 °C to +65 °C. Storage: -40 °C to +85 °C.

Typical areas of use

• Agricultural machinery (e.g. adjusters on combine harvesters, round baler configuration)
• Mobile and off-highway vehicles (e.g. replacing hydraulic functions, folding traffic equipment, conveyor height adjustment)
• Offshore & marine applications (e.g. tilting GPS antennas, bathing platforms, dinghy garages)
• Industrial & logistics equipment (e.g. loading ramps, transport racks, goods carriers)

Customer benefits (summary)

• Stroke length up to 1000 mm
• High push/pull forces up to 10,000 N
• IP69K protection for high-pressure cleaning
• Built-in controller for simplified integration
• Robust materials and environmental resistance
• Speed regulation and current/temperature monitoring
• Synchronous operation capability (up to six actuators)

Technical specifications

• Model: LD1000C
• Maximum force: up to 10,000 N (push/pull)
• Maximum speed: up to 156 mm/s
• Stroke length: min. 15 mm – max. 1000 mm (infinitely variable / customizable)
• Installation dimension (A): if stroke < 400 mm → stroke + 200 mm; if stroke ≥ 400 mm → stroke + 250 mm
• Certifications: NRTL (UL 61800-5-1:2012/R:2021-02) and CSA C22.2 No. 274:2017
• Duty cycle: 30%
• Position feedback: final position, absolute displacement measuring system, analogue feedback, digital via CAN
• Synchronous operation: yes (up to six actuators)
• Supply voltage: 12 VDC, 24 VDC (other versions up to 48 VDC available on request)
• Integrated limit switch: yes
• End position signal: yes
• Protection class: IP69K (static)
• Self-locking: up to nominal load
• Storage temperature: -40 °C to +85 °C
• Operational ambient temperature: -20 °C to +65 °C
• Rod end: stainless steel, bore 12.1 mm
• Housing end: stainless steel, bore 12.1 mm
• Lift tube material: stainless steel
• Housing material: die-cast aluminium, anodised aluminium profile
• Housing colour: similar to RAL 9005 (black)
• Connection: M12 connector
• Cable lengths: 3 m, 5 m, 10 m (custom lengths available)
• Control/regulation: programmable start/stop ramps, speed control, configurable speed, handset control, PLC integration
• Internal protection: power shutdown, temperature monitoring
• Options: selectable suspensions, special strokes (ex works or customer-adjustable), customised adapters/couplings, customised cables/plugs