Electric cylinders

Stroke : 25 mm - 1,000 mm
Force: 16,000 N
Speed: 172.5 mm/s

TiMOTION’s MA3 is the most powerful actuator in the MA series that affords a maximum 16000N force (push/pull). It was specifically designed for heavy-duty applications and harsh working environments that require durability. Examples of ...

Stroke : 20 mm - 500 mm
Force: 500 N
Speed: 10.8 mm/s

The VN2 series linear actuator is designed specifically for ventilation applications to help remove smoke, heat, and toxic gases from buildings quickly in the event of a fire. It is also designed to generate a minimum smoke layer in the ...

Stroke : 25 mm - 1,000 mm
Force: 0 N - 6,000 N
Speed: 0 mm/s - 52.5 mm/s

The linear electric actuator MA2 has been specifically designed for harsh environments. Many applications require the automation of heavy loads, especially in the industrial industry. It has been developed to pass ...

Stroke : 110 mm - 3,800 mm
Force: 800, 1,250 N
Speed: 3.5 m/s

Range widening: Belt-driven rodless electric axis Elektro Series BK-2 The family of belt-driven electric axis Elektro BK Series expands with the introduction of size 2. Available in two variants (Heavy ...

Force: 300 N - 5,200 N
Speed: 200, 500 mm/s
Ambient temperature: -10 °C - 50 °C

The new Elektro SSC cylinders represent the “electric” transposition of the pneumatic compact cylinders. Designed for applications that require components having reduced dimensions, ...

Stroke : 25 mm - 1,000 mm
Force: 1,000 N

... direct current motor available in two versions, 12 and 24VDC. The position of the motor can be controlled using an optional encoder. A resettable optional fuse can be inserted in the cylinder ...

Stroke : 100 mm - 1,200 mm
Force: 6,600 N - 11,300 N
Speed: 0.6 m/s - 1.3 m/s

The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary movement, generated by a motor, is converted into a linear movement by means of a recirculating ball screw. Available in 4 sizes, 32, ...

Stroke : 100 mm - 1,000 mm
Force: 18 kN
Speed: 0 m/s - 0.1 m/s

... highlighted by onboard electronics that can eliminate the need for standalone controls. Higher power (up to 16 kN) opens a new, wider range of hydraulic applications to electric conversion. And they meet ...

Stroke : 1,000, 500, 2,000, 1,500 mm
Force: 6,000 kgf - 32,000 kgf
Speed: 6.5 mm/s - 52 mm/s

... to smaller and lighter parts, the power cylinder is electrical so it has much better power savings than hydraulic types, greatly reducing power consumption. Comparison ...

Stroke : 200 mm - 2,000 mm
Force: 49 kN - 294 kN
Speed: 0 m/s - 0 m/s

The Worm Series Power Cylinder is the perfect power cylinder to replace hydraulic cylinders. Worm Series LPWB provides large thrust by using a high ...

Stroke : 200 mm - 2,000 mm
Force: 2,450 N - 313,000 N
Speed: 0 m/s - 0.1 m/s

... top quality Power Cylinders This series can be used in every application with the following features: Brake motor that holds load strongly; Gear reducer that provides low-noise operation; ...

Stroke : 19 mm - 130 mm
Force: 0 N - 750 N
Speed: 0 m/s - 0 m/s

... black color and has a high strength plastic housing that protects the motor and gear. This actuator has 12/24 V DC permanent magnetic motor. LA12 Series has a built-in limit switches but not adjustable. ...

Stroke : 20 mm - 300 mm
Force: 0 N - 2,500 N
Speed: 0 m/s - 0 m/s

The LA23 actuator is a push or pull actuator that works up to 2,500N and a speed of 9.4mm/s. This has a higher lifting force and exchangeable cables. It is also small enough to fit into a variety of spaces.

Force: 0 N - 8,000 N
Speed: 0 m/s - 0 m/s

The powerful LA27C actuator with 600 N push and 4000 N pull. The actuator is equipped with a mini-fit socket for exchangeable cables and is specially designed for nursing home beds. It is for the legrest and backrest function of the bed. ...

Force: 1,130 N - 49,600 N
Speed: 0 m/s - 1.7 m/s

... -based cylinders these electric cylinders add programmability, the option of closed loop control, plus high thrust force, high durability and a long service life to your application. ...

Stroke : 50 mm - 400 mm
Force: 50 N - 650 N

... length 50 ... 400 mm Force 50 ... 650 N Linear drive with ball screw, non-rotating piston rod with plain bearing guide Special features: Mechanical system with permanently attached motor

Stroke : 30 mm - 1,500 mm
Force: 600 N - 1,700 N

... Size 32, 40, 50, 63, 80, 100 Stroke length 30 ... 1500 mm Force: 600 ... 17000 N Motor can be mounted using axial or parallel kit Linear drive with ball screw in Clean Design Special ...

Stroke : 50 mm - 300 mm
Speed: 0.1 m/s - 0.6 m/s

EAC Series Electric cylinders with absolute sensor with/without integrated controller Linear slide size: 28 mm x 28 mm - 60 mm x 156 mm Drive method: ball screw Stroke: 50-300 mm Pushing ...

Stroke : 47.2 in
Force: 9,300 N
Speed: 0 m/s - 1.3 m/s

... -based cylinders these electric cylinders add programmability, the option of closed loop control, plus high thrust force, high durability and a long service life to your application. ...

Stroke : 750 mm
Force: 600 N
Speed: 0.8 m/s

... the ET32 electric cylinders can be mounted in existing fluidpower cylinder applications, adding infinite programmability and control. For new applications Parker recommends the ETH-series The ...

Stroke : 100 mm - 1,000 mm
Force: 10, 5 kN
Speed: 50 mm/s - 120 mm/s

... heavy duty electric cylinders have a very long life cycle. Modular Design The design of the RACO electric actuators is based on a modular system and allows the optimal combination ...

Stroke : 200 mm - 1,600 mm
Force: 20 kN
Speed: 30, 10, 15, 5 mm/s

... heavy duty electric cylinders have a very long life cycle. Modular Design The design of the RACO electric actuators is based on a modular system and allows the optimal combination ...

Stroke : 100 mm - 600 mm
Force: 5, 4 kN
Speed: 25, 35, 50 mm/s

... implemented. Electric actuators equipped with 3-phase RACO motor or DC motor provides an interface for various sensor components (EPS Sensor and RACOmatic® Controller). All Electric ...

Stroke : 20 mm - 130 mm
Force: 0 N - 750 N
Speed: 0 mm/s - 50 mm/s

Although the LD75 electric cylinder was designed for use in extreme conditions, it can also be used in less demanding applications thanks to its innovative design. The LD75 impresses with its extremely ...

Stroke : 100 mm - 1,000 mm
Force: 10,000, 15,000 N
Speed: 0 mm/s - 1,250 mm/s

New electric cylinder for heavy-duty applications RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical ...

Electric cylinder LZ 80 (Heavy duty cylinder) The powerful LZ80 electric cylinder impresses with high tensile and compressive forces of up to 5,000 ...

Stroke : 50 mm
Force: 0 N - 300 N
Speed: 0.6 in/s

The electric cylinders of the component M9 are low-cost linear drives for small powers and feature compactness and space-saving dimensions.

Stroke : 10 mm - 25 mm
Force: 8.5 N - 22 N

The latest series of SMAC electric actuators. Designed to overcome problems with conventional devices in the packaging industry. The CBL offers speed, accuracy and efficiency while remaining competitive on price. Superior ...

Stroke : 10 mm - 25 mm
Force: 23 N - 100 N

The latest series of SMAC electric actuators. Designed to overcome problems with conventional devices in the packaging industry. The CBL50 offers speed, accuracy and efficiency while remaining competitive on price. Superior ...

Stroke : 10 mm - 25 mm
Force: 8.5 N - 22 N

An electric cylinder with a built-in controller in a single, compact package for simple installation. Ideal for applications with limited space but requiring accurate control. The electric ...

Force: 0 kN - 30 kN
Speed: 0 mm/min - 30,000 mm/min

Electromechanical Servo Testing Actuators Industries • - Universal • - Components Test load • - 1 kN - 100 kN Type of test • - Tensile • - Compression • - Components • - Fatigue Applications • - Flexible range of application • ...

Stroke : 200, 300 mm
Force: 6, 20, 50, 100, 160 kN
Speed: 0 mm/s - 160 mm/s