Roller conveyor RBA 50

horizontaltransportchain drive

Chain drive from roller to roller | load capacity up to max. 200kg/m Frame structure Sheet steel profile (wall thickness 3 mm) with welded cross braces Chain guard cover closed completely Dimensions Chain case: 120 x 60 x 3 mm L-profile: 80 x 40 x 3 mm Roller spacing: adapted depending on load Conveyor rollers Kraus conveyor rollers series 5020 Galvanised steel tube Ø 50 mm x 1.5 mm Steel axle Ø 12 mm with internal thread M8x15, with double chain wheel, steel: 1/2" x 5/16", number of teeth = 14 Drive Chain drive with three-phase gear motor 230/400 V – 50 Hz, IP55 The conveyor rollers are driven by a 1/2" x 5/16" chain from roller to roller Motor position: in the centre under the frame structure Conveying speed: Standard speed 6–30 m/min Conveyor width The width is determined by the properties and weight of the unit load – the unit load should be resting on at least 3 rollers Standard widths: 470 mm, 670 mm, 870 mm Conveyor length: on request, depending on the roller spacing Surface finish Painted in RAL colours/galvanised Advantages Conveyance of unit loads horizontally or at a slight upward gradient No downward gradient required Sturdy design Very good transmission of force Safe to use thanks to chain guard cover Low-noise running