Gas sampling probe DIL-1/H

with dilution unitheatedstainless steel

- Dilution unit electrically heated up to max. +180 °C [+356 °F] - Installed on a mounting plate with thermally insulated cover - Dilution gas pre-heater heats the dilution gas to operating temperature - With a dilution ratio of 30-40:1 as standard, optionally in the range from 10:1 to 500:1 - 2 internal filters for sample and dilution gas are provided to protect the dilution section - With check valve for test gas - Power: 230 V - Material of sample-contacting parts: stainless steel, quartz glass, Viton® - Optionally: bypass injector DIL-1/B to shorten the response time during vacuum operation; second sample gas outlet 2 x AUS for undiluted sample gas; add-on set DIL-1/-A with 1 precision pressure controller and 2 vacuum pressure gauges; add-on set DIL-1/-A-FM with 2 ball valves, 1 precision pressure controller, 2 vacuum pressure gauges and 1 flow meter for test gas feeding; control panel DIL-1/-S with 1 pressure controller and 2 pressure gauges, 1 flow meter and 2 shut-off valves The electrically heated M&C dilution unit DIL-1H is used in analytical technology to dilute the sample gas or components in the sample e.g. in the case of toxic gases, moisture or emission measuring. The M&C dilution unit is based on the functional dilution technique which has proved itself in the M&C gas sample probe SP2000-H/DIL for years. Dilution unit type DIL‑1/H, 2 filters for sample and dilution gas, check valve for calibration gas, thermostat adjustable 0 to 180 °C, high‑temperature limiter with reset key responding at +30 °C above Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset, mounting panel with thermally insulated cover, power