Continuous incinerator

Our Biomass Incinerators utilises biomass fuels as available to bring the incinerator up to temperature and as an auxiliary fuel. This replaces diesel or gas for sites that are remote or don’t have a readily available supply of fuel. Easy Installation With no diesel or gas supply infrastructure needed, installation is a lot easier and faster, making it ideal for quick deployments during emergencies or for remote mines or military camps. Certification Macrotec is certified to the following standards: ISO 9001:2015 | Quality Management Systems ISO 14001:2015 | Environmental Management Systems ISO 45001:2018 | Occupational Health & Safety Management Design Our Biomass Incinerators are very similar to our standard incinerators, with two chambers, combustion air fans, and a stack. Incinerator All our incinerator models have two chambers, with a large hearth to help distribute the waste, and a large secondary chamber to promote settling of particulate matter (dust). The chambers are also sized for a two second reaction (retention) time. We use a high temperature alumina-silicate refractory, with a cold crushing strength of 80Mpa and service temperature of 1,500˚C to cast our incinerators. The refractory is acid resistant with very high abrasion resistance. We also insert 100mm of low-density insulation, giving an incubator a typical R-value of 1.54m²K/W, minimising heat loss for lower fuel consumption and a safer working environment. All our incinerators operate on a continuous feed basis.