Control unit FORCIPOL

Control Unit of FORCIPOL Series for Manual Grinding and Polishing Operation FORCIPOL instruments are designed to modular configuration for manual, semi-automatic and programmable automatic equipment. When only manual preparation is required, FORCIPOL Control Unit can be fitted on the FORCIPOL grinder / polisher. If automatic operation is required in the future, one of the FORCIMAT automatic heads can be installed at any time. The FORCIPOL Control Unit is ergonomically placed on the equipment. Modern touch pad controls with ergonomic turn knob allows fast and easy setting of parameters and increases productivity. Wheel speed, operation time, motor on/off and water on/off functions can be set in seconds. Cooling water is automatically activated and deactivated at the beginning and end of operation. The actual wheel speed and operation time are digitally displayed. All parameters can be changed during operation. The last parameter settings are always retained in the memory. An audible signal notifies the operator when the process is completed. Automatic Disc Cleaning & Drying function can be activated with a single button to obtain perfectly cleaned disc surfaces in seconds. Smart Water Saving feature allows tons of water saving over the years. Technical Specifications • Operation : Manual • Control Panel : Touch Pad Controls • Program Memory : Last Parameters Retained in Memory • Manual Operation Mode : Yes • Disc Cleaning & Drying Feature : Yes • Smart Water Saving Feature : Yes • Compatible Instruments : FORCIPOL 102/202 • Compressed Air Requirement : None • Dimensions, WxDxH, (cm) : 20 x 20 x 39 • (above FORCIPOL working disc)