Machine tool chamfering tool CrazyMill Doublechamfer

The tungsten carbide deburring tools from Mikron Tool reach top-level performance when it comes to chamfering and deburring in small dimensions, difficult materials and hard-to-reach locations. CrazyMill Frontchamfer in the diameter range of 1.0 mm to 6.0 mm (.0393" to .236") reaches even difficult-to-access locations because of its ingenious geometry and exhibits a constant, positive cutting behavior over the entire cutting edge. CrazyMill Backchamfer in diameters of 0.36 mm to 5.7 mm (.0142" to .224") for back edge deburring or hole deburring even in the smallest dimensions without unclamping the part (alternative process to thermal deburring). With CrazyMill Doublechamfer in the diameters of 0.9 mm to 5.7 mm (.0354" to .224") you can deburr edges and difficult-to-access locations front and rear with one single tool. The universally applicable CrazyMill Radiuschamfer in the diameter range of 1 mm to 6 mm (.0393" to .236") is suitable for front and back chamfering as well as for all possible internal and external contours and intersections of holes and milling procedures. All four models have the same quality features: They are suitable for use in small-scale machining in a wide variety of materials, can be utilized at high feed rates and result in first-class surface quality. CrazyMill Doublechamfer combines the possibilities and qualities of both prior tools. It can deburr front and back in a single clamping. Its small diameter (available from diameters of 0.9 mm/.0354" and up) allow the back deburring of holes from a diameter of 1 mm (.0393").