Small-diameter hone 814

HAND HONING APPARATUS On an existing processing machine – like a milling machine or a lathe – Mu-Tools offers manual honing devices that allow the machine to be converted into a low-cost honing machine. Thanks to the expansion system of these devices, geometry and repeatability within the micron can be achieved, even for people who have no experience in honing. Each division of the micrometric drum represents 1 micron of expansion of the honing tool and is easily visible during the entire honing operation. Hand honing apparatus type 814 for diameters of 0.6 to 1.5 mm In the 814 honing apparatus, a friction-clutch system is incorporated to protect the small diameter honing tools. For honing tools Ø 0.6 – 1.5 mm With built-in friction-clutch Length: 80 mm without clamping shank and without tools Clamping shank Ø 6 mm Ready for use immediately and everywhere Ideal for individual and Small production Runs Minimum changeover time The sensitive micrometric expansion allows controlled machining at every stage. During the entire processing time, the respective material removal can be read off on the scale drum. Maintenance-free With micrometric expansion Expansion of the honing tools during the machining via micrometre screw Repeat accuracy within 0.001 mm, reduces control measurements to a minimum. Honing An even expansion, and parallel bores achieved over the entire circumference up to 0.1 mm Available from Ø 0,6 mm Maximum honing length: 12.5 mm / 10.5 mm for Ø 0.6 and 0.7 mm Grit size galvanic tools : D 35, D 30 and D 15