Absolute rotary encoder KTD-S100B-0017-W0AM-JAQ

magneticsingle-turnsolid-shaft

Product overview
POSITAL IXARC singleturn kit encoder KTD-S100B-0017-W0AM-JAQ is a preassembled, solid-shaft encoder module designed for integration as a sub-assembly. It delivers 17-bit singleturn resolution with SSI Preset capability and RS422 output for industrial position sensing applications.

Interface
Interface: SSI with Preset
Manual functions: Preset via cable or connector
Interface cycle time: ≥ 50 µs
SSI format: 00000000SSSSSSSSSSSSSSSSS
Diagnostics: Error and warning bits, register values
Programming functions: Via config pin — calibration, WIEGAND sensor test, filter selection, preset value, temperature
Housing remark: Backwards compatible to KCD

Outputs
Output driver: RS422
Connection: PCB connector, male, JST-GH

Electrical data
Supply voltage: 4.75 – 15 VDC
Typical current consumption: 32 mA (max 35 mA @ 5 V DC)
Power consumption: ≤ 0.3 W
Start-up time: < 100 ms
Clock input: RS422, clock speed 300 kHz – 1 MHz
Polarity and short-circuit protection: Yes
EMC note: The kit encoder is a sub-assembly and not an independent system; CE/EMC compliance must be ensured by the integrator for the overall setup
Max. permissible electrical speed: 12,000 1/min (12 bit)
MTTF: 20 years @ 105 °C

Sensor
Technology: Magnetic
Singleturn resolution: Pre-programmed 17 bit
Multiturn resolution: 0 bit
Accuracy (INL): ±0.0878° (≤12 bit) measured after calibration at room temperature
Output code: Binary

Environmental specifications
Protection class (housing): IP30
Operating temperature range: -40 °C to +105 °C

Mechanical data
Housing: Pre-assembled, steel with e-coating (KTL) + powder coating
Shaft type: Solid
Shaft material: Stainless Steel V4A (1.4404, 316L)
Shaft fixation option: Shaft outside threaded
Shock resistance: ≤ 200 g (half sine 6 ms, EN 60068-2-27)
Permanent shock: ≤ 20 g (half sine 16 ms, EN 60068-2-29)
Vibration resistance: ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)

Electrical connection / Pinout
GND: 1
Preset: 2
Config: 3
Data+: 4
Data-: 5
Clock-: 6
Clock+: 7
Power supply: 8

Lifecycle
Status: New

Accessories (examples)

• 10039297 - KxD 36mm BiSS C / SSI Kit Connection Cable
• 10040130 - KxD 36mm BiSS Master MB3U Connection Cable
• 10045651 - KxD 36mm BiSS C / SSI Kit - 150mm Open Wire
• 10048949 - Kit Control Box - Adapter Cable KxD-BC/Sx 36mm
• 10047799 - KIT Configuration Tool + Cable (36mm JAQ)

Technical characteristics / specifications

• Model: KTD-S100B-0017-W0AM-JAQ
• Brand: POSITAL (IXARC)
• Type: Singleturn kit encoder (IXARC)
• Interface: SSI with Preset
• Output driver / protocol: RS422 (SSI)
• Supply voltage: 4.75 – 15 VDC
• Typical current: 32 mA (max 35 mA @5 V DC)
• Power consumption: ≤ 0.3 W
• Start-up time: < 100 ms
• Clock speed: 300 kHz – 1 MHz
• Singleturn resolution: 17 bit (pre-programmed)
• Accuracy (INL): ±0.0878° (≤12 bit) after calibration at room temp.
• Output code: Binary
• Protections: Polarity inversion and short-circuit protection
• Max. electrical speed: 12,000 1/min (12 bit)
• MTTF: 20 years @ 105 °C
• Sensor technology: Magnetic
• Protection index: IP30
• Operating temperature: -40 °C to +105 °C
• Housing: Steel, e-coating (KTL) + powder coating
• Shaft: Solid, Stainless Steel V4A (316L)
• Connection: PCB connector male (JST-GH)
• Compliance note: Kit encoder is a sub-assembly; CE compliance to be ensured by integrator for overall system