Absolute rotary encoder KTD-BC00B-1617-LE2A-BAQ

magnetic16-bitsingle-turn

Product overview
POSITAL IXARC multiturn modular kit encoder, model KTD-BC00B-1617-LE2A-BAQ. Compact hub-shaft design for integration in industrial motion systems. Digital interface: BiSS C (BP3 profile). Pre-programmed resolution: 17-bit singleturn, 16-bit multiturn.

Interface
Digital interface — BiSS C (BiSS BP3 standard).
Manual preset — via cable or connector.
Interface cycle time — ≥ 50 µs.
Diagnostics — error and warning bits available.
Programming — config pin: calibration, WIEGAND sensor test, filter selection, preset value, temperature settings.
Note — kit is a sub-assembly; integrator responsible for overall system compliance.

Outputs
Output driver — RS422.
Connector — 8-pin PCB connector, male, JST-SR.

Electrical data
Supply voltage — 4.5–5.5 VDC.
Current consumption — 57 mA @ 5 V.
Power consumption — ≤ 0.3 W.
Reverse polarity protection — no.
Short-circuit protection — no.
Max. permissible electrical speed — 12,000 1/min.
EMC note — kit encoder is a sub-assembly; CE/EMC compliance of complete installation is integrator's responsibility.

Sensor
Technology — Magnetic TMR.
Resolution singleturn — 17 bit (pre-programmed).
Resolution multiturn — 16 bit (pre-programmed).
Accuracy (INL) — ±0.1° after calibration at room temperature (±0.36° without electronic calibration).
Code — binary.

Environmental specifications
Protection class (housing) — IP30.
Operating temperature — -40 °C to +105 °C.

Mechanical data
Top shield — screwed.
Housing material — steel with e-coating (KTL).
Shaft type — hub (blind).
Shaft material — brass.
Shaft fastening — set screw.
Weight — 17 g.
Shock resistance — ≤ 200 g (half sine 6 ms, EN 60068-2-27).
Vibration resistance — ≤ 20 g (10 Hz–2000 Hz, EN 60068-2-6).

Connection plan
GND — 1
Preset — 2
Config — 3
Data+ — 4
Data- — 5
Clock- — 6
Clock+ — 7
Power supply — 8

Accessories (examples)

• Cable: JSTSH 8 to open wire (20 mm) for kit encoder
• 10078948 — Kit Control Box — adapter cable KxD-BC/Sx 20mm
• Wire harness: JSTSH 8 to open wire (20 mm)
• 10078953 — CBL-JST8SH-020AH-088Y-DSBS-F09S
• 10079692 — KIT Configuration Tool + Cable (20mm)

Technical specifications

• Model: KTD-BC00B-1617-LE2A-BAQ
• Brand: POSITAL
• Interface: BiSS C (BP3)
• Cycle time: ≥ 50 µs
• Output: RS422 via 8-pin JST-SR PCB connector
• Supply: 4.5–5.5 VDC; Current 57 mA @5V; Power ≤ 0.3 W
• Sensor: Magnetic TMR — singleturn 17 bit, multiturn 16 bit
• Accuracy (INL): ±0.1° after calibration
• Protection: IP30; Temp range -40 °C to +105 °C
• Mechanical: hub-shaft (brass), steel housing with e-coating, weight 17 g
• Max. speed: 12,000 1/min; Shock ≤200 g; Vibration ≤20 g

Certification & product status
No CE approval for the kit as a standalone unit — kit is a sub-assembly; integrator must ensure CE/EMC compliance for the complete installation.

Product life cycle
Product status — lab sample / engineering sample