Sliding clamping element 6.2210

mechanicalfor transfer presscompact

The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge. Once the high-pressure spindle has been adjusted to suit the height of the clamping edge, the clamping force is built up by turning the hexagon nut in clockwise direction. The clamping force achieved depends on the set tightening torque of the torque wrench. Installation note Before applying the tightening torque, the high-pressure spindle must be screwed against the clamping edge so that there is no play. If the parts are not rigid, tighten the high-pressure spindle using the hexagon nut until there is no play. Clamping block with integral high-pressure spindle Function The sliding clamp is manually placed in the T-slots and screwed against the die clamping edge. The clamping force is built up by turning the hexagon nut in clockwise direction. The clamping force achieved depends on the set tightening torque of the torque wrench. Installation note The clamping blocks with integral high-pressure spindle can be mounted on spacer bars.