- Products
- Catalogs
- News & Trends
- Exhibitions
Pump control panel Q-B2 serieswater supply3-channel2-channel
Add to favorites
Compare this product
Characteristics
- Application
- for pump, water supply
- Number of channels
- 2-channel, 3-channel
- Other characteristic
- automatic, digital, microprocessor, with switch
Description
Product
Main functions and inputs
Indicators and protections
Mechanical and environmental
LEDs and additional signals
Technical specifications
- Single-phase or three-phase control panel for pump systems, models Q-B2X and Q-B2T.
Main functions and inputs
- Power supply (single-phase): 100–240 Vac 50/60 Hz.
- Power supply (three-phase): 100–240 Vac or 310–450 Vac 50/60 Hz.
- Inputs for 3 single-pole level probes (COM - MIN - MAX).
- G.A. input normally open for general alarm activation.
- Push-buttons: AUTOMATIC - 0 - MANUAL (momentary for manual).
- DIP-SWITCH selectors for configuration:
- enable level alarm from probes
- thermal cut-out activation delay (5 / 10 s)
- alarm output settings
- alarm reset enable from motor clicson
- filling / emptying mode
- enable start/stop float function
- delay of electronic board activation on mains return
- G/P1 and G/P2 normally open inputs.
- T1 and T2 inputs for motor clicson.
Indicators and protections
- Green LED: power ON / failure or incorrect phase sequence indication.
- Red LED: level alarm from probes or G.A. input.
- Electronic control of maximum current (overload) with assisted calibration.
- Electronic control of minimum current (dry run) with assisted calibration and automatic reset on minimum current alarm.
- Timer for motor enable delay on mains return.
- Protection of auxiliary circuits and motor with fuses.
- Cumulative alarm outputs: voltage-free contacts (COM-NO-NC, resistive load 5 A / 250 V) and live output (12 Vdc / 100 mA).
- General disconnect switch for door lock.
- Provision for run capacitors on single-phase version (capacitors not included).
Mechanical and environmental
- Enclosure: ABS, degree of protection IP55.
- Operating ambient temperature: -5 °C to +40 °C.
- Relative humidity: up to 50% at 40 °C (non-condensing).
LEDs and additional signals
- 2 green LEDs: automatic mode enabled.
- 2 green LEDs: motor active.
- 2 red LEDs: motor overload / minimum current alarm.
- 2 red LEDs: motor clicson activation alarm.
- DIP-SWITCH selector #8: enabling motor exchange (motor selector).
Technical specifications
- Models: Q-B2X, Q-B2T.
- Power supply (single-phase): 100–240 Vac 50/60 Hz.
- Power supply (three-phase): 100–240 Vac or 310–450 Vac 50/60 Hz.
- Probe inputs: 3 single-pole probes (COM - MIN - MAX).
- Alarm input: G.A. normally open.
- Control: AUTOMATIC - 0 - MANUAL push-buttons.
- DIP-SWITCH configurable functions: level alarm enable, thermal cut-out delay (5/10 s), alarm output settings, alarm reset from clicson, filling/emptying mode, float start/stop enable, delay on mains return, motor exchange enable (DIP #8).
- Current control: electronic max current (overload) and min current (dry-run) with assisted calibration; automatic reset on minimum current alarm.
- Timer: motor start delay on mains return.
- Protections: fuses for auxiliary circuits and motor; general door-lock disconnect switch.
- Alarm outputs: voltage-free contacts COM-NO-NC (5 A / 250 V) and live output 12 Vdc / 100 mA.
- Provision for run capacitors on single-phase versions (not included).
- Enclosure material: ABS, IP55.
- Operating temperature: -5 °C to +40 °C.
- Relative humidity: 50% at 40 °C (non-condensing).
- Auxiliary inputs: G/P1 and G/P2 normally open; T1 and T2 for motor clicson.
- Indicators: multiple green/red LEDs for power, automatic mode, motor status, overload/minimum current and clicson alarms.
Other SEA-LAND SRL products
Inverter and electric control panel
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?
© 2026 All rights reserved - Terms - Privacy policy - General Terms - Manage cookies - 鄂ICP备2026053537号-2 -