Sika® PowerPack-10 MF is a powdery superplasticizer compound based on Sika® ViscoCrete® polycarboxylate polymer technology especially made for use in low emission cementitious and calcium sulphate based dry mortars.
Easy to dose into the dry mix mortar
No additional air entrainment
Free of formaldehyde and ammonia
Usage
Sika® PowerPack-10 MF is used in a dosage comparable to Melamine.
Use in dry mortar industry to produce:
Grouts
Dry concrete
Injection mortar
Cementitious screed
Dry mortar calcium sulphate flow screeds
Binder mixture for construction site flow screeds
Advantages
Sika® PowerPack-10 MF adsorbs onto the particle surface of the binder. Due to a combination of electrostatic forces and steric repulsion effects, the solid particles can be effectively dispersed. The benefits include, but are not limited to the following:
Very good flowability and self-levelling behaviour
Easy to dose into the dry mix mortar
Reduced mixing times on the building site due to rapid adsorption
Long-term stability enables long slump life
Low influence onto the hydration
Stabilizing influence onto the screed mix
No additional air entrainment
Efficiency over a wide pH-range
Compatible with other additives, e.g. citric acid
Free of formaldehyde and ammonia
Packaging
20 kg bags / 960 kg per pallet; bigbag with 850 kg
Colour
White to light grey powder
Composition
Modified polycarboxylate with additives
Shelf life
24 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging.
Storage conditions
Dry storage at temperatures up to 30°C. Protect from direct sunlight.
Bulk density
Approx. 0.96 g/cm³
pH-Value
Approx. 5.5 (40% solution)