Lubrication fitting JELA3410200L

This lubrication jet generates a straight, well-defined stream of fluid to a predetermined target with differential pressures of 10 to 200 psid. It is ideal for directing streams of lubricating oil at critical bearings, cooling oil at meshing gears, or fuel at the inside of vaporizing tubes in aircraft combustion chambers. 343 Unscreened Lubrication Jets are offered with a ± 15% tolerance and are available in a Lohm range from 200 to 7900 Lohms. - Type: Lubrication Nozzle - Metered Flow Range: 200 to 7900 Lohms - Diameter: 0.343 inches - Screened: No General Performance - Lohm Rate Tolerance: ± 15% - Differential Pressure (Recommended): 10-200 psid - Maximum Working Pressure: 1500 psid - Flow to hit 0.25" diameter target at 2" distance: 90% - Nominal Weight: 3.1 grams Materials - Body: 15-5PH CRES (AMS 5659) - Pin: 15-5PH CRES (AMS 5659) - Finish: All CRES Parts Passivated. Pins are prewaxed. Do not degrease. Do not lubricate. Part Numbers & Specifications - JELA3410200L: 200 Lohms, 0.07 in - JELA3410250L: 250 Lohms, 0.06 in - JELA3410350L: 350 Lohms, 0.051 in - JELA3410450L: 450 Lohms, 0.045 in - JELA3410600L: 600 Lohms, 0.039 in - JELA3410800L: 800 Lohms, 0.034 in - JELA3410105D: 1050 Lohms, 0.029 in - JELA3410135D: 1350 Lohms, 0.025 in - JELA3410175D: 1750 Lohms, 0.022 in - JELA3410225D: 2250 Lohms, 0.019 in - JELA3410295D: 2950 Lohms, 0.017 in - JELA3410385D: 3850 Lohms, 0.015 in - JELA3410500D: 5000 Lohms, 0.013 in - JELA3410650D: 6500 Lohms, 0.011 in - JELA3410790D: 7900 Lohms, 0.01 in Replacement Parts & Accessories - CUTA3430801C: Installation / Extraction Tool Set - Not Reusable: Replacement Pin - Cross Section View: See image in secondary images - Dimensional View: See image in secondary images - Installation Hole Details: See image in secondary images Key Product Facts - Type: Lubrication Nozzle - Metered Flow Range: 200 to 7900 Lohms - Diameter: 0.343 inches - Screened: No General Performance - Lohm Rate Tolerance: ± 15% - Differential Pressure (Recommended): 10-200 psid - Maximum Working Pressure: 1500 psid - Flow to hit 0.25" diameter target at 2" distance: 90% - Nominal Weight: 3.1 grams Materials - Body: 15-5PH CRES (AMS 5659) - Pin: 15-5PH CRES (AMS 5659) - Finish: All CRES Parts Passivated. Pins are prewaxed. Do not degrease. Do not lubricate.