Electric water heater ESS

The ESS Emergency Shower Water Heater is a factory-packaged tepid water system designed to supply on-demand tepid water to emergency drench systems. This heavy-duty water heater is constructed of a carbon steel tank and internally lined with 1/2″ thick Hydrastone cement to ensure tank longevity when operating at elevated temperatures and is fully insulated with 3″ thick polyurethane foam. The ESS water heater is packaged with our Therm-O-Mix®/WWM specifically designed, tested, and proven in emergency safety shower/face/eyewash applications. When you specify and install a ThermOmega Tech tempered water system, you can be confident that it will be a safe and dependable source of tepid water for an emergency drench system. Operation Packaged with the ESS is a triple-redundant thermostatic valve explicitly designed for emergency safety shower/face/eyewash applications. The Therm-O-Mix®/WWM is factory mounted and piped to the water heater. After water flow is activated at the emergency station, the outlet water temperature from the ESS will be maintained at 85°F tepid temperature. The ESS Emergency Shower Water Heater can achieve the high-volume demand required for a safety drench system by mixing the 170°F water in the tank with incoming cold water. The mixing valve of our tempered water system meets OSHA and ANSI requirements and can provide constant 85°F output regardless of inlet pressure and temperature variations. The temperature is factory set making the valve tamper-proof. The water temperature is not warm enough to open skin pores and not cold enough to deter usage.