- Hydraulics - Pneumatics >
- Valve >
- Needle valve >
- Aalborg
Aalborg needle valves
DN: 8 mm - 25 mm
Pressure: 410 bar
Temperature: -54 °C - 250 °C
The KTN 11.11 is our NPT threaded needle valve. Body and needle in AISI A182 F316 stainless steel, the needle also has a heat treatment that provides greater resistance ...
Type: Plug valves Material: steel Description: Needle valves type DVG and DVG-R The needle valves are for piping systems to shut-off or control the ...
DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C
... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...
Budenberg
DN: 0.125 in - 0.75 in
Pressure: 210 bar
Temperature: -20 °C - 100 °C
Double-acting flow control valves available from 1/8" to 3/4" bsp, max.working pressure 210 Bar, adjustable oil flow rate from 0,5 to 80 Lt./min. (depending on the size)
F.lli TOGNELLA
Pressure: 310, 210 bar
Flow rate: 10 l/min - 380 l/min
This valve is a non-pressure compensated, fine-metering, adjustable flow control valve.
Comatrol
DN: 0.25 in
Pressure: 980,000 Pa
Temperature: -10 °C - 150 °C
Desired flow rate can be set precisely with the ultra-precision processing of the needle part and the structure without backrush.
... High stability The needle uses linear motion for high reproducibility and no hysteresis. There will be no fluctuations in the valve opening even if there are sudden pressure fluctuations or vibrations. ■Maintenance ...
DN: 46 mm - 179 mm
Pressure: 2,000 psi - 20,000 psi
... used for onshore and offshore petroleum drilling. JIELIN Choke valve falls into: positive choke valve, needle choke valve, adjustable choke valve, cage ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... Threaded mounting of bonnets not wetted to avoid seizure and leaks - Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life - Metal valve seat with leak-tested ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...
DN: 6.35 mm
AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve.
DN: 0.25 in
AIR LINE SHUTOFF VALVE, 1/4" BSP (FF) Needle air valve 1/4" BSP (FF).
DN: 0.5, 0.25, 0.75 in
Temperature: -20 °C - 50 °C
Opening / closing system: The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Maximum ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version ...
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, ...
DN: 12, 14 mm
One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. ...
Temperature: 60, 100 °C
Flow rate: 4 l/min - 15 l/min
... of flow control valves offers excellent, economical, independent flow control, which can be used in any application where a needle flow control valve is required. SERIES CV100 ...
MPB INDUSTRIES
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available ...
BelGAS Standard Needle Valves offer four choices in 316 stainless steel, as well as one piece forged carbon plated steel, soft seat and hard seat, angle and globe styles. The Mini valve ...
DN: 0.375 in
Pressure: 700 bar
⅜" - 18 NPT connections Ensures system safety and control
DN: 0.5 in
Pressure: 0 bar - 8 bar
Temperature: 4 °C - 90 °C
Fine Flow Needle Valve Product Code - 22272908011 Name - Fine Flow Needle Valve Material - Reinforced Polypropylene Color - Orange Hydraulic Connection - BSP 1/2″ Seal ...
TEFEN
DN: 80 mm
suction valve for horizontal, subterranean storage tanks, with siphon protection (liquid column up to 2.5 m) and pressure relief valve.
DN: 16 mm
Temperature: -40 °C - 125 °C
... engine, battery, cabin, e-machine. Coolant Flow Control Valves are needed inside this system for shutting off the coolant flow, switching over coolant circuits and regulating the coolant flow. The valve ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining