- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Male fitting >
- AIGNEP
AIGNEP male fittings
Diameter: 10, 12.5, 19, 25 mm
Operating pressure: 0 Pa - 35,000,000 Pa
... challenging mobile hydraulic applications. Single ISO 16028 Flat-face couplings can be connected directly on the fixed installed male plates, giving you maximum flexibility to use tools and attachments both with and ...
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds ...
Operating pressure: 1 bar - 60 bar
STANDARD THREADED FITTINGS Brass nickel-plated fittings with different thread and dimensions.
Diameter: 0.5 in
Operating pressure: 16 bar
TECHNICAL DATA Material Body and thrust ring: nickel plated brass Thread Metric, taper and parallel Seal NBR rubber Clamp Stainless steel AISI 316 Size M5 ÷ G 1/2 Fluid Air, water, oil, steam Working temperature - 20 ÷ +70 ...
Diameter: 4 mm - 16 mm
Compression fitting made of SUS316, which is highly resistant to corrosion. Best suitable for not only chemical industries but industries such as medical care, semiconductor manufacturing, solar battery and secondary ...
NIHON PISCO CO., Ltd.
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
This tube fitting serves best where strength is required or the atmosphere contains chemicals. Metal body is made of SUS304. Seal material is made of FKM rubber. For price options, please contact our distributor ...
NIHON PISCO CO., Ltd.
Diameter: 3, 6, 4 mm
Operating pressure: -0.1 MPa - 1 MPa
This ultra small barb fitting is best suitable for requiring corrosive resistance or use in chemical atmosphere where space-saving piping is required. Compared to Minimal Fitting, the size is max. ...
NIHON PISCO CO., Ltd.
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 16 bar
EQOfluids FR
Diameter: 20 mm - 63 mm
Operating pressure: 10 bar
EQOfluids FR
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
Diameter: 4 mm - 10 mm
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...
ITV
Diameter: 0.25 in - 2 in
Operating pressure: 10 bar
Port Refer below technical data sheet (Available BSP) Media Air, Water, Oil, Gas Upto 10 bar Temperature 85" C (Chilled water & high température available on request) RPM 1000 RPM High-Perfomance Bearings & Seals Dual Connection Available
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
... préparation units like filter, regulator and lubricators(FRL) Full bore piping enables smooth flow of fluids. New Design SS collet Male Taper threads with PTFE coating Simple & fast connection of tube just by plugging ...
UFLOW AUTOMATION
Diameter: 4 mm - 16 mm
... préparation units like filter, regulator and lubricators(FRL) Full bore piping enables smooth flow of fluids. New Design SS collet Male Taper threads with PTFE coating Simple & fast connection of tube just by plugging ...
UFLOW AUTOMATION
Koganei has developed these high-quality, high-performance fittings using various technologies and know-how gained over the years through our manufacturing of pneumatic systems equipment. ■Features *ln chemical resistance... The ...
Diameter: 15 mm
Water connection fitting with female thread (F) 15x1/2 NP EF The Stahlmann fitting guarantees leak-free installation of Stahlmann stainless steel corrugated pipe solutions. The product material ...
Stahlmann
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 16 mm - 63 mm
90° Elbow with threaded male take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Diameter: 9 mm - 27 mm
90° brass elbow with metallic continuity IP67 Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material housing Brass Model 90°-Bend Surface ...
Diameter: 6 mm
-Straight male connector with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
Straight male connector with barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose ...
M&C TechGroup Germany GmbH
Diameter: 4 mm
-Straight male connector with barbed fitting for flexible tube -Thread size: G 1/4" -Corrosion-resistant -High level gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, ...
M&C TechGroup Germany GmbH
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Exd II C Reducers are used to provide a means of attachment between apparatus, pipes and mouthpieces of dissimilar thread forms. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - ...
Exd Nipples allow connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...
C.Matic S.p.A.
Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 16 bar
The MT is the new push-in fittings line that has been developed and designed to ensure high reliability and safety in the pneumatic braking systems on commercial and industrial vehicles. The push-in fittings ...
C.Matic S.p.A.
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...
C.Matic S.p.A.
... a tube. Solid Hex Plugs Solid Hex Plugs are also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple ...
Diameter: 27 mm
Terminal plug stainless steel design with male thread for coupling sockets nominal size 2,7 Type: 60 Material: Stainless steel 1.4305 Price information: Due to price increases on the raw materials market, some items ...
Diameter: 1.2 mm - 4.1 mm
Straight push-in fitting M-Push 110 brass design nickel-plated with male thread and external hexagon Type: gerade Steckverschraubung Operating pressure: -0,75 – 10 bar Temperature range: 0 °C to ...
Diameter: 20 mm - 150 mm
Operating pressure: 16 bar
... • - Reduced coupling with lock Ref.2412 DN 40-25 to DN 150-100 • - Male coupling with lock Ref.2413 DN 20 to DN 150 • - Female coupling with lock Ref.2414 DN 20 to DN 150 • - Male coupling without ...
SFERACO
Diameter: 10 mm - 22 mm
... / M16x1 / M24x1.5 / M28x1.5 Overview added sizes SO 11124 OR - Male adaptor union with Conovor O‑ring seal Sizes 10-1/2 / 10-1 / 12-1/4 / 18-1/8 SO 11124 OR METR - Male adaptor union METR ...
Diameter: 6 mm - 42 mm
Operating pressure: 60 bar - 160 bar
Operational safety on male stud connection is 2.5 times the stated pressure. Operational safety on the pipe connection is 4 times the stated pressure. *On marked male stud connection - 1.5 times
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Please note the permissible working pressure of the hose used . For Compatible hoses see chapter : Hose - HOS . Other O-Ring materials upon request : B = NBR , FDA - Compliant ; E = EPDM , FDA - Compliant ; Z = FFKM ( Kalrez )
Schwer Fittings
Diameter: 4 mm - 12 mm
Operating pressure: 15 bar
Material: 1.4404, AISI 316L, O-Ring: Viton, Maximum working pressure dependant on that of the hose used.
Schwer Fittings
... standard male 45°, 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RNC-316 1.1/2” ...
Anamet Europe
... Connection to an Anaconda conduit is made with a standard male, 45°, 90°, stainless steel swivel or fixed fitting which is screwed into the female thread of the adapter. Since BNC-316 cable-hose fittings ...
Anamet Europe
Diameter: 5.5 mm - 62 mm
... standard male 45°, 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RAC-316 1.1/2” ...
Anamet Europe
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining