AIGNEP screw-in fittings
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Diameter: 18, 20, 12, 16, 10 mm
Operating pressure: 1,200 bar
Standards adaptors are also available individually. If among our standards adaptors or high pressure adaptors you don't find what you are looking for, our Design Office remains at your disposal to design and manufacture the adaptor ...
AREMECA
Diameter: 40 mm - 400 mm
Reusable aluminum coupling system, suitable to be fitted to MARMOTECH® and STEELBLAST hoses,including: • Aluminum semi-flanges according to UNI EN 1092-1 PN 10 (ex UNI 2277) • Flat black SBR gasket • Bolts, nuts ...
Diameter: 9 mm - 27 mm
90° brass elbow with metallic continuity IP67 Connection type screw connection to housing Thread Construction type External thread Degree of protection (IP) conduit dependant 67.00 Material ...
Diameter: 4, 6 mm
Operating pressure: 10 bar
... male connector for flexible tube - Male thread connection: G 1/8" - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF Hose and tube screw connectors as well ...
M&C TechGroup Germany GmbH
Diameter: 6 mm
... with barbed fitting for flexible tube -Barbed fitting: DN 6 -Corrosion-resistant -High level of gas tightness -Material of sample-contacting parts: PP hose nozzles, G-ISO thread, material: PP Hose ...
M&C TechGroup Germany GmbH
Diameter: 8 mm
... barbed fitting for flexible tube Thread size: G 1/8" Barbed fitting Corrosion-resistant High level of gas tightness Material of sample-contacting parts: PP hose nozzles, G-ISO thread, ...
M&C TechGroup Germany GmbH
Diameter: 10 mm - 100 mm
... Benefits Of Our Threaded Fixings & Fittings: Manufactured from a selection of high quality materials Resistant to weathering factors, acids and rust Provides a strong and secure fixing point Mix of ...
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Pipe connectors Suitable for realizing watertight, current leading connections between high current pipes. Hexagonal design is standard. But on request also in octagon or as groove nut design deliverable.
KROMA MEC SRL
KROMA MEC SRL
Diameter: 0.25 in - 4 in
Exd IIC Conduit Seals prevent the passage of gases, vapours or flame through the Exd conduit system, from one part of t he electrical system to another. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: ...
KROMA MEC SRL
Diameter: 0.156 in - 0.75 in
Operating pressure: 290 psi
Push in fittings for Vehicles applications complying with DOT FMVSS §571.106, SAE J2494-3 e SAE J1131 specs. 1-2 > Body and Release Ring: Brass UNI EN 12164 CW614N - UNI EN 12165 CW617N Nickel Plated 3 > Holding Ring: ...
C.Matic S.p.A.
Operating pressure: 0 bar - 15 bar
C.Matic S.p.A.
Operating pressure: 25 bar
The CX is a “push on“ fitting made of AISI 316L, completely free of Orings since conceived for heavy duty applications involving high temperatures, aggressive fluids and where also FPM Oring would not be suitable.
C.Matic S.p.A.
Diameter: 6 mm - 60.3 mm
Connecting two pipes Aseptic flange connection according to DIN 11864-2 with buttweld ends for orbital welding with O-Ring. Material: 316L (1.4435), Fe < 0.5%. Sterilizing temperature: 150°C. With marking of batch number, material, ...
CONNECTORS
NORMYDRO
HYDRAULIC INDEX : *HYDRAULICS FITTINGS (STEEL AND STAIN) * STAIN FITTINGS * CLAMPS * STELL FITTINGS SERIES 100 AND 250 KG BRIGGS AND SOCKET WELDING 3000 AND 6000 IBS * ...
NORMYDRO
Diameter: 6 mm - 38 mm
NORMYDRO
... procedure • AUTOMATIC TIGHTENING LIMIT: contact between AR3-FORM® ring and fitting body because of the nut tightening effect compels the operator to stop tightening • CUTTING RING FITTINGS INTERCHANGEABILITY: ...
Rastelli Raccordi
Diameter: 15 mm
... all parts are made from brass With the use of plastic pipes, support sleeves are also required for the clamping ring screw fittings Technical details GTIN/EAN - 4011666503220 Article number - DGKE815035 Designation ...
Schneider Druckluft GmbH
Diameter: 58.7 mm
Operating pressure: 20 bar
Irrigation connector F inlet and F outlet, DIN 2999 threaded Cod. G64.01 Irrigation elbow for hydrant connection
Diameter: 0.25 in - 4 in
Operating pressure: 40 bar
Host connection for thread-stud, suitable for flexible hoses, both for high and low pressure. As required (in accordance with the stud and material), The personalised design of the piece will be studied, in which case it will be considered ...
The model 53 Socketweld fitting is designed to be socket welded directly to a 2” socket end. Possible configurations include welding to an industry standard “Sockolet” fitting, which is then welded to ...
Rohrback Cosasco Systems
Diameter: 10 mm - 80 mm
Threaded hose nozzles series SAS Threaded hose nozzles of SAS series are available in nominal diameters DN10 - DN80. By default they are manufactured and offered in stainless steel AISI 316L. The flexible ...
CROSS PIECES Cylindrical thread 4 x inside thread
Diameter: 5.5 mm - 45 mm
... 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RNC-316 1.1/2” to 3” adapter in ...
Anamet Europe
Diameter: 5.5 mm - 45 mm
... swivel or fixed fitting which is screwed into the female thread of the adapter. Since BNC-316 cable-hose fittings are available only till 1.1/4”, the BNC-316 1.1/2” to 3” adapters in ...
Anamet Europe
Diameter: 5.5 mm - 62 mm
... 90°, swivel or fixed fitting which is screwed into the female thread of the adapter. Since RNA-316 cable-hose fittings are available up to 1.1/4”, the RAC-316 1.1/2” to 3” adapter in ...
Anamet Europe
Diameter: 25 mm - 100 mm
... conveying equipment, vacuum hopper, suction conveyor, dosing system pelleting machines/ tablet presses PROPERTIES special threaded sealing insert matches the outer hose contour easily and quickly fitted re-usable vibration ...
Diameter: 0.38 in - 2.5 in
Operating pressure: 100 bar - 315 bar
OMT Group Spa produces a complete range of couplings for gear pump. The range of couplings for gear pump in aluminium for low pressures (max working pressure 180 Bar) consists in: RA series with two fixing holes RP series with ...
Diameter: 0.25 in - 1 in
Operating pressure: 17.23 bar
... to galvanic and stray current. It is installed between pipes made from dissimilar metals, and features a female brass pipe thread to female solder connection. It consists of a union nut, two tailpieces, and a gasket that ...
Watts Water Technologies
Diameter: 0.25 in - 2 in
Operating pressure: 20 bar
The 2062 Series is a series of stainless steel screw couplings manufactured by Sferaco. Equipped with a "lost wax" moulding, a male conic threaded BSP, and a female cylindric threaded ...
SFERACO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining