Pressure / Vacuum control valves suitable for safeguarding containers during loading / unloading phases of powder, grain and fibre products
... The reason why need to use Milvent Differential Breather: 1. The ventilation valve used in the chassis gearbox of existing off-road vehicles is usually a one-way valve. When passing through water, ...
Shenzhen Milvent Technology Co.,Ltd
Vaccum Release Valve This kind of Vaccum Release Valve is applied on the product need release vaccum during work. Waterproof and dustproof Application: Vaccum ...
Shenzhen Milvent Technology Co.,Ltd
Automotive Vents. Protective Vents Adhesive Vents Vent Stickers Snap-in Vents Screw-in Vents Fit-In Vents Press-in Vents Breather Vent Plugs Venting Screw Breather Plugs
Shenzhen Milvent Technology Co.,Ltd
This valve is used in tanks, silos or hoppers when there is the need to prevent the risk of implosion or explosion of the product-receiving organ. Our VPP model is made entirely from stainless steel and can manage ...
DN: 6, 4 mm
Flow rate: 16 l/min
Pressure: 700 bar
... been preset at the cut-off valve. Furthermore the cut-off valve ensures that the pump is not subjected to excess pressure. Fields of application Single pump with cut-off valve ...
DN: 2 mm - 4 mm
Flow rate: 8 l/min - 16 l/min
Pressure: 700 bar
... pressure relief valves DBE and DBG are used for amongst other purposes as safety valves to protect hydraulic systems from impermissibly high pressures. Furthermore they can be used to set the desired ...
Controlled pressure: 69,000 Pa
Controlled pressure: 4 bar - 5 bar
DN: 40 mm - 65 mm
Flow rate: 1 m³/min - 40 m³/min
... filtration, air oil separation, minimum pressure and check valve. Available in various sizes, to equip compressors with 3 to 30 Kw of power (flow rates from 0.3 to 4.5 m3/min). Minimum pressure valves ...
Controlled pressure: 0.3 bar - 13 bar
DN: 1.5 in - 56 in
Weight: 3 kg - 285 kg
... operated Pressure Relief Valve? Step 1: Open upstream valve. Step 2: Loose the lock nut of the controller adjustment screw and turn adjusting screw counterclockwise until lowest outlet pressure. Step ...
Elite Line Industrial Corp.
Controlled pressure: 1 bar - 13 bar
DN: 0.5 in - 6 in
Weight: 0.8 kg - 45 kg
Model RLT/ RLF, a Direct acting relief valve or Direct acting pressure relief valve, is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise ...
Elite Line Industrial Corp.
Controlled pressure: 0.3 bar - 13 bar
DN: 1.5 in - 56 in
Weight: 3 kg - 285 kg
... protect system from over pressure. (Project Reference : Pressure Relief Valve applied Fire Pump Room) How to adjust Pilot operated Pressure Relief Valve? Step 1: Open upstream valve. Step ...
Elite Line Industrial Corp.
Controlled pressure: 3 bar - 7 bar
DN: 0.125 in - 1 in
Series of adjustable safety valves, range from 3 to 7 bar and pre-set to be specified. For mounting on reservoirs or in those applications where the existing pressure must not exceed the fixed value.
Controlled pressure: 0 psi - 100 psi
Flow rate: 16, 19 l/min
The RV-5200 and RV-5300 Series operate as either a relief valve or low flow back pressure regulators. Adjustments are made through a non-rising stem available with an attractive knob, plain to allow insulation of OEM ...
Controlled pressure: 0 psi - 100 psi
Flow rate: 56, 65 l/min
The S-5200 and S-5300 Series are designed for applications requiring precise sequencing of pneumatic control circuits. Sequencing and deadband characteristics can be tuned by varying the output restriction. Adjustments are made through ...
Pressure: 0 bar - 400 bar
Weight: 90, 95, 100, 105 g
- Compact design - Simple mounting hole - Valve combinations possible - Unified insert contour - Operation with one line possible - Working pressure up to 400 bar - All valves with integrated ...
DN: 0.5 in - 0.75 in
Pressure: 13.8, 10.3, 4.8 bar
Weight: 0.6, 0.4 kg
... thermal actuator modulates the valve open. If the fluid temperature is above the valve’s set point, the valve will continue to modulate open allowing additional fluid discharge. As ...
Thermomegatech
DN: 0.5 in - 0.75 in
Pressure: 13.8, 10.3, 4.8 bar
Weight: 0.4, 0.6 kg
... actuator modulates the valve open. If the fluid temperature is above the valve’s set point, the valve will continue to modulate open allowing additional fluid discharge. As the outlet ...
Thermomegatech
DN: 0.38, 0.5 in
Pressure: 10 bar
Weight: 0.2 kg
... classify as reverse-acting, the valve will open when the fluid temperature rises to the valve’s set point. As the fluid temperature increases to within the operating range of the TV/HAT-RA, the thermal ...
Thermomegatech
Controlled pressure: 0.3 bar - 10 bar
DN: 8 mm - 100 mm
... threaded bushing on the housing of the valve body makes it possible to directly mount the valves on the support brackets and maintains the freedom of assembly of the union union nuts on the PVC-U, PP ...
DIVATEC,SL
Controlled pressure: 0.5 bar - 10 bar
DN: 8 mm - 100 mm
... maintenance valve serves in the industrial plants for the stabilization by the primary side of the working pressures preset • To avoid pressure spikes, the pressure maintenance valve can also be used ...
DIVATEC,SL
Controlled pressure: 0.3 bar - 10 bar
DN: 65 mm - 100 mm
... maintenance valve serves in the industrial plants for the stabilization by the primary side of the working pressures preset • To avoid pressure spikes, the pressure maintenance valve can also be used ...
DIVATEC,SL
DN: 40, 50 mm
Pressure: 14.5 psi - 362.6 psi
Where highest material and quality standards are important, then safety valves made of gunmetal with flange connections can be an option. Also, this type of safety valve made of corrosion- and seawater-resistant ...
Goetze KG Armaturen
Controlled pressure: 350 bar
Flow rate: 500 l/min
— PRE* valves are pilot operated pressure relief valves with electric proportional control and mounting interface in compliance with ISO 6264 standards (CETOP RP 121H). — These valves ...
Duplomatic Oleodinamica
Controlled pressure: 50 mbar - 1,200 mbar
VS Pressure relief valves VS type is a pressure relief valve designed to reduce temporary pressure peaks in burning appliances. The shutting-off of automatic valves or non-tightly ...
Controlled pressure: 1 bar
DN: 8 mm - 13 mm
ECONEX SVB gas safety shut-off valves are equipped with a new concept powerful solenoid which provides higher operating pressures and flow capacities than most comparable valves now available. The SVB ...
ECONEX S.R.L.
Controlled pressure: 15 psi - 6,500 psi
DN: 0.5 in - 2.5 in
Series 2700 ASME NB Certified: Air, Steam & Water European CE Approved Sizes 1/2%u2033 X 1%u2033 to 1-1/2%u2033 X 2-1/2%u2033. Effective orifice areas from 0.068 to 0.573 square inches. Pressures from 15 to 6500 psig. Temperature ...
Farris Engineering
DN: 0.5 in - 20 in
Flanged safety valve that meet requirements of ASME Secc. VIII and API 526 available in different material options to fulfill any customer requirement.
EFSVALVES
Controlled pressure: 40 bar
DN: 0.5 in - 2 in
Threaded safety valve that meet requirements of EN standard according to PED/CE directive, in stainless steel material available either BSP or NPT threads.
EFSVALVES
Controlled pressure: 400, 100, 250 bar
DN: 0.5 in - 2 in
Threaded safety valve that meet requirements of EN standard according to PED/CE directive in stainless steel material available either BSP or NPT threads for pressures up to 400 bar [ 5.800 psi].
EFSVALVES
Controlled pressure: 200 mbar - 32,000 mbar
DN: 20 mm - 150 mm
... neutral gas and steam, and fluids. Safety valves protect steam systems and tanks from excess pressure. As they are often the last link in the safety chain, they must remain operational in all conditions. Safety valves ...
GESTRA AG
MEP-A is a series of safety valves for presses and pneumatically acting safety subject groups; they are 3 way/2 pos. NC active components for compressed air powered single acting actuators control. To achieve their safety ...
Controlled pressure: 1 psi - 150 psi
A compact, highly accurate, direct acting pressure relief valve. Factory preset to desired crack pressure and/or flow specifications. Internal adjustment provides tamper proof safety against inadvertent pressure changes. ...
Generant
Controlled pressure: 10, 16 bar
... involved. Depending on the nominal diameter involved the Pressure relief valves range of applied pressure is between 0-6bar. Application area of Pressure Relief Valve The Pressure relief valves ...
Controlled pressure: 0 psi - 150 psi
DN: 1, 0.5, 0.25, 0.75 in
... anti-siphon valves can provide the required back pressure to the pumps when it is not created by the application. They also will assist in stopping a siphon condition. Additionally, when they are used in a bypass, they ...
Controlled pressure: 40 bar
DN: 15 mm - 100 mm
Weight: 1.15 kg - 37 kg
water distribution PRESSURE gauge 1/4" connection SPRING : 1 to 7 bar PRESET : 3 bar MEMBRANE : EPDM BODY : Brass - Bronze DN 2"+1/2 to 4" SEAT SEAL : EPDM
SOCLA
Controlled pressure: 1 bar - 16 bar
DN: 25 mm - 80 mm
Flow rate: 1.8 m³/h - 36 m³/h
sea water application, very aggressive water With 1/4'' plugs on both sides to allow pressure gauge connection - Setting : from 1 to 6 bar (indicative value according to EN1567 standard) Manufactured on order only
SOCLA
DN: 10 mm - 80 mm
Flow rate: 0.65 m³/h - 56.5 m³/h
Pressure: 25 bar
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...
SOCLA
Flow rate: 0 l/min - 35 l/min
Pressure: 0 bar - 350 bar
Design sandwich body valve direct operated Connection ISO/Cetop 03 size 6 Customs tariff number 84814010 These valves must be set according to the application. ...
Please specify:
Help us improve:
remaining