- Hydraulics - Pneumatics >
- Pump >
- Standard pump >
- ARO
ARO standard pumps
Flow: 100 l/min - 5,500 l/min
Pressure: 10 bar
Head: 14 m - 45.1 m
... horizontal centrifugal pump, constructed in compliance with EN 733 standards; widely used in water supplies, pressurisation and fire-fighting systems, cooling, heating, irrigation, industrial and agricultural ...
Pentax Pumps
Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch
... environment and any plumbing it comes in contact with due to its acidic nature. Features High impact ABS tank Three 1" standard condensate inlet holes 6' Power cord with ground Built-in overflow safety switch Pellet ...
Liberty Pumps
Flow: 10 m³/h - 1,300 m³/h
Head: 7 m - 40 m
Power: 15 kW - 75 kW
Stainless steel sewage pump is a hydraulic equipment that works underwater with motor and pump on the same shaft. It has such advantages as non-clogging, anti-winding, compact and small, ...
Shanghai Weihu Pump Industry
Flow: 0 m³/h - 240 m³/h
Head: 14 m - 104.5 m
Power: 1.1 kW - 75 kW
... ■ Suction/delivery ports: according to standard EN1092-2 ■ Impeller: Cast-iron GG20 with cataphoresis coating ■ Pump shaft: Stainless steel AISI 304 ■ Mechanical seal: Carbon / Ceramic / NBR ...
Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm
... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...
HYDRATRON
Flow: 4 m³/h - 400 m³/h
Pressure: 1.6 MPa
Head: 20 m - 125 m
... with a high specific gravity. The YQMPS type pump is a YONJOU standard pump for all the applications listed. The YQMPS type pump can be customized with a heating ...
Zhejiang Yonjou Technology Co., Ltd.
Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch
The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking for a compact and ...
Flow: 3, 6 l/min
Pressure: 0.8, 2.1 bar
Fluid temperature: 50 °C - 100 °C
... gas diaphragm pump. The use of high performance engineering plastics and elastomers allow use in high temperature applications. 2 heads allows flexibility of paralllel or series connection to extend the pressure / vacuum ...
Boxer GmbH
Flow: 500 m³/h
Pressure: 16 bar
Head: 140 m
RD pumps Simple and modular construction ISO 2858-5199 norms. Discharge sizes from DN 32 to DN 125. High hydraulic efficiencies and low NPSH value (investment casting impellers). Heavy duty shaft and ...
SALVATORE ROBUSCHI & C. srl
Flow: 2 us gal/min - 1,200 us gal/min
Torpedo Pumps Unique bullet shape HDPE shroud provides a low coefficient of friction and allows the pump to slide easily over internal pipe obstacles Pump shroud is constructed of ...
QED Environmental
Flow: 1 l/min - 45 l/min
Pressure: 5 bar
... developed by TACMINA suppresses the pulsation and the two pump head that repeats discharging alternately always maintains a constant flow rate. Precision Transfer of a Superior Standard Achieved Our ...
F406 - Standard Duty Transfer Pump FEATURES: Handles lubricants, solvents, industrial chemicals, additives and non-corrosive liquids F401 - Rotary Pump FEATURES: Telescoping ...
Alemite
Flow: 1.2, 4.3 l/min
Pressure: 0 bar - 4,000 bar
Power: 11 kW - 45 kW
... 4.3 l per minute and an operating pressure of 4,000 bar. Conventional working principle with many extras Pressure is generated with an axial piston pump, precisely regulated by the standard ...
Water Jet Sweden AB
Flow: 46, 55 m³/h
Pressure: 0 mbar - 33 mbar
Power: 1.5, 2.2 kW
Single-stage pumps with valve technology Close-coupled versions with B35 close-to standard motors Bracket version with B5 standard motors Sound pressure level 65 – 72 db(A) Material ...
SPECK-PUMPEN
Flow: 15 l/min - 35 l/min
Pressure: 4.5 bar - 6 bar
Power: 24 W - 48 W
Customization is our standard practice: all our pumps can be modified to meet your specific requirements. And within a few days. Customized range of air pumps: Features • Efficient ...
Shenzhen Boden Technology Development Co., Ltd
Flow: 0 m³/h - 700 m³/h
Pressure: 0 bar - 700 bar
Power: 600 kW
... triplex pumps the crankshaft is supported by two roller bearings while in the case of the quintuplex or septuplex pumps intermediate bearings are provided. TITANO series pumps normally ...
Peroni Pompe
Flow: 1 m³/h - 20 m³/h
Pressure: 25, 10, 16 bar
Head: 9 m - 65 m
... improves the standard of living and make life enjoyable. 5.)Soft start and soft stop extends water pump motor life. 6.)It can be used in wide range voltage, especially place where there is big voltage ...
... ordinary pump is used to pump the product directly into the ice cream flow. The amount of syrup or sauce introduced into the ice cream can be regulated directly on the machine and can be changed during ...
Flow: 8, 250, 120, 45 l/min
Power: 12 W - 2,500 W
Fluid temperature: -40 °C - 120 °C
... electrified future whilst navigating the legislative complexities present in the industry today. Gates ThermalPro™ water pumps have been specifically developed to optimise energy efficiency whilst delivering performance ...
... Aside from providing standard engine cooling, electric water pumps reduce engine load, and are equipped with automatic sensors to ensure the optimal amount of coolant at all times. You'll most frequently ...
Flow: 151 l/min
Pressure: 0 bar - 241 bar
... cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. Markets: • - ...
TD Type water pump (50Hz &80Hz) The type TD pumps are single stage in-line centrifugal pumps, equipped with standard motor and mechanical seal. Comparing with other ...
Flow: 1,000 m³/h
Pressure: 16 bar
• PP, PVDF, PTFE materials • For large pumps • PN16 • ISO 2858 / DIN EN 22858 connections • For fluids with solids X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps. Based ...
With our hand-lever pumps you can easily generate a hydraulic pressure up to 2500 bar. The pumps are mainly suitable to operate small devices or during maintenance. Manual ...
The Poly-Hand Pump threads directly to a standard drum bung or carboy. It is constructed entirely of rugged polyethylene and is inert to strong acids, alkalis and many solvents. • Delivers by positive ...
Flow: 13.6 l/min - 74.2 l/min
Pressure: 51 bar - 260 bar
... smooth power output. PUMP OPTIONS Most industry-standard shaft options Return-to-neutral device for smooth de-stroke capability Cooling fan when additional cooling is desired Tandem pumps ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining