- Materials - Tools - Components >
- Standard Mechanical Component >
- Cap >
- Caplugs
Caplugs caps
The spindle top cover with blue sealing These accessories are the optimal choice for equipment that must comply with strict hygiene requirements. The seal blocks out water and bacteria and also prevents a non-hygienic metal-to-metal ...
... - black material: - soft Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Diameter: 12 mm
... nominal cross section: - 35 mm² Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Diameter: 34 mm - 35 mm
... material: - soft flame retardant Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...
Hagemann Systems GmbH
Diameter: 3.17 mm - 53.34 mm
Model: - Hexagon - Material body: - Brass Connection: - Female thread
Diameter: 40 mm
Attributes for stainless steel handrails Material stainless steel (V2A) Surface
EG = EPDM, gray EB = EPDM, black CB = CR, black SB = Silicon, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)
A. Vogt GmbH & Co.KG
MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)
A. Vogt GmbH & Co.KG
MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)
A. Vogt GmbH & Co.KG
Diameter: 15 mm
CELO's plastic cap CAT for CAHP and TEC screws, clip on the head offering greater safety avoiding to fall with the friction. This larger diameter cap covers the oversized profile holes. Applications Aluminium ...
Operating temperature: -65 °C - 165 °C
... with RF coaxial cables in computer field, wireless network, medical equipment and electronic instruments. BNC Male Dust Cap with Chain RoHS Certificate: Compliant Frequency range - DC-4HZ Dieletric withstanding ...
Danyang Teruilai Electronics Co., Ltd.
Operating temperature: -45 °C - 125 °C
Type BNC is one kind of RF coaxial connector with a bayonet coupling mechanism, which has the excellent performance of quick connect/disconnect, high reliability, they are widely used in connection with RF coaxial cables in computer ...
Danyang Teruilai Electronics Co., Ltd.
Operating temperature: -45 °C - 85 °C
The purpose of the dust cap is to protect the connector and prevent dust from entering Teruilai P/N: N-FCM RoHS Certificate: Compliant Connector parts - Material - Plating Body - Barss - Suco plated Insulators - teflon
Danyang Teruilai Electronics Co., Ltd.
Diameter: 110 mm - 200 mm
Insulating caps laid on the insulators for the duration of the low voltage work, and in addition to insulating profiles, to insulate by fitting to live parts. Use voltage: 1000 V for alternating current / 1500 V for ...
DERANCOURT
Diameter: 15 mm - 54 mm
Operating temperature: -20 °C - 70 °C
End cap, Brass, »sharkbite«, for pipe exterior MaterialBrass CW602N Material Brass CW617N O-Ring Nitrile Cartridge ring 304 Stainless steel Cartridge ring Polyphenylsulfones (PPSU) Grab ring 316 Stainless ...
RIEGLER & Co.KG
Diameter: 6 mm - 38 mm
For use in the propeller shafts of ships’ drive units. To protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the propeller shaft. Highly ductile punched part made of sheet steel
For use in automobile propeller shafts. To protect and hold the internal ball bearings of the universal joint and cover the propeller shaft. Highly ductile punched part made of sheet steel
Diameter: 12 mm
The security cap is manufactured by APEM, and is utilized to avoid any inadvertent operation,and when the cap is raised the lever can be controlled freely. The lever is reset/locked in a stable position ...
Diameter: 16 mm
Operating temperature: -30 °C - 160 °C
10D cap is a Ø16.0 mm round cap with a slightly concave surface and designed to match the Controlmec™ navigational solution not only with the below panel height but also in look and feel. The 10D cap ...
Diameter: 8.2 mm
Operating temperature: -20 °C - 85 °C
Features Available in various colours Various fittment options available Availablity of press fit designs
Elcom
Diameter: 1.4 mm - 18 mm
Operating temperature: -40 °C - 125 °C
Adhesive lined, heat shrink insulating caps specifically designed to insulate, seal and protect end or stub splices in wiring harnesses and electronic assemblies. High shrink ratio allows fewer sizes to cover a wide ...
High-quality plastic cover caps for protection against sharp-edged cut surfaces, contamination and dust – light gray RAL 7035 finish. Rounded cover cap made of fiberglass-reinforced plastic as closure ...
MONTECH
... Cap 5 20x20, black Cap 5 40x20, black Cap 6 60x60, black Cap 6 60x60, grey similar to RAL 7042 Cap 6 120x30, black Cap 6 120x30, ...
item industrial applications
Diameter: 3 mm
... Insert : Stainless steel, zinged steel, coppered steel (2) Insert : Stainless steel Aluminum or Stainless Steel cap (Colors to choose include red, white, blue, black) (3) Black in standard, other colors ...
Diameter: 12.2 mm - 26.3 mm
Made from nylon-6 (PA-6) Available in various colours For decorative and protective purposes Also available in assortment box 019 Check our extensive ranges of nylon or metal screws and nuts
Skiffy
End Cap provides protection against injuries and improve profile end appearance. The material of End Cap is ABS, black.
Diameter: 20 mm - 158 mm
Diameter: 4 mm - 24 mm
The CTI series is a pull-tab cap developed by BMP Tappi. It is specifically developed with EVA construction with yellow color. This round tube connector is engineered with 4 mm to 24 mm diameter. In addition, this product ...
B.M.P
Diameter: 22 mm - 27 mm
Operating temperature: 250 °C
... - Reliable and secure - Easy installation on tube line set - Controlled tight inner diameter allows Locking Assurance Cap to remain securely in place on tube
Oetiker
Diameter: 8 mm - 12 mm
Protection caps for the protection of threaded ends, with inner hexagon, plug on, black
Diameter: 12 mm - 28.3 mm
Rongwei Electric Co.,Ltd
... fit and retrofit to the most of the locks or switchlocks with a 19mm x 16mm ‘double D’ profile. Lock features a spring-loaded cap snaps that close up the lock in idle state. Die-cast alloy and pressed steel base is used ...
Camlock Systems
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining