Caplugs round caps

Quick installation VALDINOX offers a wide range of universal fixings and accessories, 100% compatible. Our quick installation accessories save time and costs by reducing fixing elements required and thus minimizing the risk of execution ...

Diameter: 12.7, 22.2, 28.6 mm

With Integral Sealing Flange/Washer and Liquid Tight Filter Mounting Hole Diameter Range: .500˝ (12,7 mm) to 1.125˝ (28,6 mm)

Rubber Fit Vent FIT IN Vent Type suitable for not enough space for assembly a vent. Easy Assembly High Airflow Keep pressure balance. IP68 >100cc/min@70kpa Check with us for the datasheet.

Diameter: 2 mm

snap in vent with gasket fit for 2.0mm metal sheet housing IP68,IP69K Typical Airflow:1800cc/min@kpa

Diameter: 40 mm

NBM dexterous airbag module is SRT launch of a new type of flexible end executor, products the use of special soft anti-slip friction silicone material, has a wider range of airbag inflation, the advantages of good flexibility, low cost, ...

Pipe caps made of LDPE and PE LDPE and PE (polyethylene) are characterised by their resistance to most chemicals. They are flexible and practically unbreakable, which makes them optimal materials for caps. ...

Diameter: 5.7 mm - 168.5 mm
Operating temperature: min 70.0 °C

When selecting the caps, please note that the inside diameter must be 0.2 to 0.8 mm (depending on the nominal dimension) smaller than the outside diameter to be protected.

Diameter: 5 mm - 110 mm

Ideal for the protection of exposed bolts and threads. When choosing the caps please note that the inner diameter should be 0.2 - 0.8 mm smaller than the outer diameter you want to protect.

Diameter: 11 mm

... 50 mm² material: - hard Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 16.5 mm

... 95 mm² material: - hard Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 20 mm - 22 mm

HAG 535221, V0 cable cross section 35 mm2 height 26 mm application for: - for cable lugs assembly: - pre-assembly necessary, unlosable cable cross section: - 35 qmm colour: - black material: - soft flame retardant

Operating temperature: -25 °C - 85 °C

A variety of protective caps are available for increased protection.

Diameter: 12 mm - 20.5 mm

... product table below. Looking for a simple covering cap rather than a locking version? Secure Nut cap line drawing Key product features: Manufactured from a strong Polypropylene Locking covering ...

Diameter: 4 mm - 30 mm

Domed Nut & Bolt Caps All of our Plastic Nut caps & Plastic Bolt caps are made from a strong, durable LDPE and are made to fit all industry standard BSP and metric thread sizes. Nut ...

Diameter: 0.89 mm - 9.53 mm
Operating temperature: 0 °C - 315 °C

... used over EPDM Caps for their heat resistance properties these are a cost effective masking solution. Round Silicone End caps are a versatile product that are able to stretch over ...

Diameter: 30 mm - 65 mm

The CAPS_TR is a polyethylene protective cap with hole, manufactured by PLASTEM. This product is generally designed for inside protection. The dimensions of this polyethylene protective cap ...

Diameter: 9.2 mm - 63.3 mm

EXTERNAL THREAD AND SMOOTH OPENING PROTECTION WITH PULL-OFF EAR Material: LDPE Colour : Yellow - Natural - Blue Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC(B1.1) Ref. AR with pull-off ear are intended for ...

Diameter: 10.7 mm - 25.4 mm

... request Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC (B1.1) Ref. CAPU_C is a flanged protection caps for outside cover. Quick fitting and removal Easily pushed onto usual threads

Diameter: 0.188 in - 0.5 in

The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...

Diameter: 5 mm - 12 mm

The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...

Diameter: 0.188 in - 0.5 in

The flanged receptacles provide a permanent and proper mating hole for quick release ball lock pins. They are designed for use on materials and in applications where the pin does not have anything to lock against. Because the pin does ...

Our company is glad to offer you Twist-Off caps used for production of drinks of different kinds, mustard, horseradish, sauces, different creams, mayonnaise, barbecue sauces, ketchup, fruit and vegetables, preserves, ...

The spindle top cover with blue sealing These accessories are the optimal choice for equipment that must comply with strict hygiene requirements. The seal blocks out water and bacteria and also prevents a non-hygienic metal-to-metal ...

Diameter: 3.17 mm - 53.34 mm

Model: - Hexagon - Material body: - Brass Connection: - Female thread

Diameter: 40 mm

Attributes for stainless steel handrails Material stainless steel (V2A) Surface

EG = EPDM, gray EB = EPDM, black CB = CR, black SB = Silicon, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

MASKING CAPS EB = EPDM, black General measuring tolerances (DIN ISO 3302, section 2 M2F) All Measurements in millimeters (mm)

Diameter: 15 mm

CELO's plastic cap CAT for CAHP and TEC screws, clip on the head offering greater safety avoiding to fall with the friction. This larger diameter cap covers the oversized profile holes. Applications Aluminium ...

Operating temperature: -65 °C - 165 °C

... with RF coaxial cables in computer field, wireless network, medical equipment and electronic instruments. BNC Male Dust Cap with Chain RoHS Certificate: Compliant Frequency range - DC-4HZ Dieletric withstanding ...

Operating temperature: -45 °C - 125 °C

Type BNC is one kind of RF coaxial connector with a bayonet coupling mechanism, which has the excellent performance of quick connect/disconnect, high reliability, they are widely used in connection with RF coaxial cables in computer ...

Operating temperature: -45 °C - 85 °C

The purpose of the dust cap is to protect the connector and prevent dust from entering Teruilai P/N: N-FCM RoHS Certificate: Compliant Connector parts - Material - Plating Body - Barss - Suco plated Insulators - teflon

Diameter: 6 mm - 38 mm

Diameter: 16 mm - 89.44 mm
Operating temperature: 0 °C - 80 °C

Within the components for rollers we manufacture and market Thermoplastic caps type: KTR-00, KTR-02, KTR-30, KTR-40, KTR-42, KTR-80.44, KTR-89.44, adapter bushings … KTR-00/01 • KTR-00/01, assembly for PVC and metallic ...

Diameter: 30 mm - 108 mm

Within the components for rollers we manufacture embedded metal caps of the type: MTR-16, MTR-20, MTR-30, MTR-30-2, MTR-40, MTR-45-17, MTS-44. MTR-16 • MTR-16 indicated in light rollers for gravity transport, thanks ...

Diameter: 80 mm - 108 mm

• MTS-44 not indicated in rollers for gravity transport, because its starting force is higher than in the lighter series. • Mounting possibilities exclusively for metal pipes in the entire series. Diameters from 80 to 108mm. and 20 and ...

For use in the propeller shafts of ships’ drive units. To protect and hold the internal ball bearings of the universal joint and fasten the shock absorber of the propeller shaft. Highly ductile punched part made of sheet steel

For use in automobile propeller shafts. To protect and hold the internal ball bearings of the universal joint and cover the propeller shaft. Highly ductile punched part made of sheet steel