CONTEC analog I/O modules
• Analogue Input Module • Encoder Input Module • Input Module • Digital Input Output Module • Strain gauge Input Module ...
Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, ...
Pixsys
The Module SOC-8 is made for controlling the minimal-power output devices through RS-485. With this, it search its function in distributed control and visualization systems. This function can straightly control other ...
The Module SIAi-8 is made for enabling the measure analog ranges from 8 current inputs through the RS-485 connection with a speed rate of 10 Hz. Due to one of available capabilities, measurement results ...
... up to +50°C, while its storage temperature ranges from -10°C up to +70°C. All 8 inputs are galvanically isolated from the module supply and RS-485 interface. Also, the protocol transmission of SIN-8 enables the creation ...
... The modules are programmed with Saia PG5® via the master controller or directly via USB. Types - PCD1.G1100-C15 Light and shade module - PCD1.G360x-C15 Room module - PCD1.F2611-C15 ...
The modules in the Saia PCD1.E-Line S-Series for HVAC applications have a mix of analogue and digital inputs and outputs. With 6 to 12 data points per module, they can be combined easily ...
... together with a Controller, the JVL Input-Output Module extends the number of inputs from 10 to 26 and the number of outputs from 3 to 11. Each I/O Module has 16 inputs and 8 outputs. ...
Combined module of digital inputs and outputs with an NPN open collector and a relay. The integrated power supply has enough power even for additional modules on the bus. 8x digital input ...
The universal Input / Output module UG 9461 has analogue inputs and 2 analogue outputs. It can be used to connect thermocouples and thermistors and offers 2 configurable measuring inputs ...
... protocol module and I/O module plug and play, features as below: 1. designed with a max of 64 modules, each I/O module is built with ...
ODOT Automation
... period of 250us.The adapter supports a maximum input of 1440 bytes, a maximum output of 1440 bytes, and 32 pcs of extended IO modules. Hardware Specification System Power: Nominal: 24Vdc, Range: ...
ODOT Automation
The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO ...
ODOT Automation
... points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue I/O are required. SmartMod+ I/O are so compact, they ...
Horner Automation
... indicator lights for each I/O point, power and network status -DIN-rail mountable SmartBlock range covers advanced I/O modules like AC Power Monitor, Isolated Thermocouple modules, ...
Horner Automation
... points of I/O to any solution and is a great choice for expanding X-Series OCS when one or more digital or analogue I/O are required. SmartMod+ I/O are so compact, they ...
Horner Automation
2 Universal analog input channels Voltage, current, resistance, potentiometer, RTD, thermocouple, strain gage (full-, half-, and quarter-bridge configuration), IEPE High-accuracy digitization 24-bit ADC, 100 ...
Gantner Instruments
1 Analog input channel measuring half and full bridge, IEPE-sensor, voltage, current, quarter bridge with completion terminal 1 Analog output channel voltage (±10 V) or current ...
Gantner Instruments
8 analog input channels thermocouple (type B / E / J / K / L / N / R / S / T / U), voltage (±80 mV) High-accuracy digitization 24-bit ADC, 100 Hz sample rate per channel, 50/60 Hz mains rejection Automatic ...
Gantner Instruments
... ServerSave time and wiring cost with peer-to-peer communicationSupports SNMPv1/v2c/v3Friendly configuration via web browserSimplify I/O management with MXIO library for Windows or Linux platformsWide operating temperature ...
Z-4DI-2AI-2DO is a I/O module with 4 digital inputs, 2 analog inputs, 2 relay outputs, slave for Modbus RTU, on two RS485 serial ports. The module allows the possibility ...
SENECA | Automation Interfaces
ZE-4DI-2AI-2DO is an I/O module with 4 digital inputs, 2 analog inputs, and 2 digital relay outputs, for slave communication over ModbusTCP-IP (Ethernet) and Modbus RTU. The module ...
SENECA | Automation Interfaces
ZE-2AI is an I/O module with 2 analog inputs for slave communication over Modbus TCP-IP (Ethernet) and Modbus RTU. The module has server functionality for the 100 Mbit/s ...
SENECA | Automation Interfaces
Multi I/O is a device that integrates UPS into a control system using fully configurable input and output relay signals. It can be used to connect two devices to a single UPS serial communication port. It can be used ...
Cost-optimized CANopen-slave-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication of the master control unit takes place via CANopen or a layer 2 protocol. The ESX.iox ...
(STW) Sensor-Technik Wiedemann GmbH
The ESX.3ios is a CAN-I/O module for the extension of the inputs/outputs of a master control unit via CAN. The communication with the master control unit takes place via CANopen, CANopen Safety, the STW ...
(STW) Sensor-Technik Wiedemann GmbH
... safety relay (max. 15 A per safety relay). The module also possesses four multifunction inputs, one module identification output, one digital output and one fixed voltage output for sensor supply. All ...
(STW) Sensor-Technik Wiedemann GmbH
The Fieldbus technology is suitable with Schlegel control units particularly for operations utilizing a big number of control units and pilot lights to be connected to the fieldbus with little wiring. The choice to network the Schlegel ...
... sight distances of up to 10km for the 805U and 20 miles for the 905U are achievable. • Point-to-point digital and/or analogue I/O transfer • Easy to use - no configuration necessary • Secure data ...
... points are short-circuit proof and completely isolated from the CANbus. P317 modules may be mixed on the same bus, with other types in the Trio CAN I/O range. The Trio CANbus I/O expansion ...
Trio Motion Technology
... The ONC with LonWorks slave module FC3A-SX5LS1 and SX5LS conforms to LonWorks specifications Modules can be slave stations in LonWorks network consisting of Lonworks compliant products The ...
... Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
... Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
... Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays
Makersan
>IO Link communication >Protection class: IP 67 (when correctly connected) >Standard M12 signal interface
... programmable Rresistor module NXI-5100 supports LAN bus control. Its optional range of resistance is 0Ω~11.11MΩ. Resistance accuracy can be up to 0.1%. For different applications, the flexible design architecture supports ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... the modules in parallel, to provide a more efficient and flexible installation. ■ Main features: - Modules expanding limit up to 31 units. - Multi-module power supply: when several ...
... -sensor modules. • Specifically designed for use with IMO i3 and XGB PLC • Analogue and digital I/O modules • Up to 16-bit resolution • Configurable inputs inc. ...
... Output Combination Card • 8-point Analog Input Card • 8-point Analog Input Flex Card Full population of discrete cards yields 64 I/O in 2 RU (rack units); full population of analog ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
... to 76,800 bit/s. The I/O modules are optimally designed for interaction with the BACnet router UBR-01 | Mk II. By using the router, the modules can then be connected to IT networks. Technical ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining