COSMOTEC industrial coolers
... Pressure Pump Chillers are the perfect match to your high-pressure intensifier pump. The chiller cools the hydraulics of the pump while the closed loop system continuously chills and recycles the water ...
Power: 0.05 W - 1,470 W
Flow rate: 200 l/h - 4,000 l/h
The HC Chiller series has been specifically designed to cool or heat water for large hydroponic and aquatic systems. Integrated with on board electronic digital display the HC series is ideal for accurate temperature control making set ...
CHARLES AUSTEN PUMPS LTD / BLUEDIAMOND PUMPS INC
Maximum temperature: 41 °F - 86 °F
Flow rate: 1,350 ft³/min - 38,850 ft³/min
... temperature requested, despite ambient conditions and load requests. Parker Hyperchill water chillers celebrate a presence of over 30 years in the industrial chiller market. This experience ...
Power: 76 kW - 360 kW
Maximum temperature: 5 °C - 45 °C
... specific need. • Available with remote monitoring. • Completely configurable with many options and kits to fit many industrial applications needs. • Condenser filters • Independent condensing plenum. • ...
Maximum temperature: 1,300, 1,600 °C
Bartlett-Snow™ rotary coolers, both direct air-swept and indirect water spray designs, are engineered to assure reliable operation, enhanced efficiency, maximum availability and facilitate ease of maintenance. These features ...
Power: 1,600 W - 4,200 W
Frame size 16 - 32 - 42 Refrigeration power - 1,6 - 4,2 kW Gas type R407C - R134A Frequency - 50 - 60 - 50/60HZ Voltage - 220 - 380V Frame construction - Steel Pump flow - 18 - 2 / 40 - 5 Pump pressure - 0,5 ...
Power: 1,050 W - 1,250 W
The gas cooler is used in gas analysis to lower the dew point of the moist sample gases.
Power: 1,800, 1,250 W
Flow rate: 4 l/min
Pressure: 1.5 bar
For accessible cooling of industrial or laboratory equipment. Your Flexible Air Cooled Chiller FLEXI CHILL is an air cooled chiller. It flows cooling water to your system by the use of a robust centrifugal ...
GRELBEX rotary coolers are of the indirect type, i.e. the material is cooled indirectly by contact with tubes. They are designed to guarantee reliable operation, high efficiency, maximum industrial ...
... on a flush-grid chain belt in plastic. The flow rate speed is step-lessadjustable by means of a frequency control. The machine can be built after sizes, and is available for all capacities, and for cooling from 25ºC ...
Keep the engine in a proper temperature range under all operating conditions. The cooling system should not only prevent the engine from overheating, but also prevent the engine from undercooling in winter.
Power: 12.5 W
... now achieved a breakthrough in terms of increasing the performance of magnetocaloric cooling systems. Magnetocaloric cooling systems do not require environmentally harmful or explosive refrigerants such as CFCs (chlorofluorocarbons) ...
Power: 2.6 kW - 4.7 kW
Maximum temperature: 3 °C - 5 °C
... temperature is about 60-80 centigrade, after cooler, the temperature is not higher than room temperature +3 to 5 ℃ Cooler adopts counter flow theory, cold air goes to cooler from bottom ...
Power: 0 W - 0.29 W
Flow rate: 30 m³/h - 800 m³/h
Pressure: 0 bar - 12 bar
Tubular beam water/oil coolers for use in industrial applications for mineral hydraulic oils and other non-aggressive copper fluids; 8 design series for total 36 sizes; max. oil pressure 12 bar; maximum ...
Power: 15 kW - 185 kW
Maximum temperature: 1,000 °C - 1,300 °C
... advantages. The exhaust gas generated from the heat exchange can be introduced to the rotary kiln, thus improving the thermal efficiency of the entire system. According to its structure, cooler can be ...
Flow rate: 15 m³/h - 120 m³/h
This series equipment is a continual cooler, after the loose old sand enters the fluid machine, in the high-pressed air blowing force blowing wind situation, it assumes the ebullition condition and starts the snake-shaped ...
Qingdao Binhai Jincheng Foundry Machinery Co., Ltd.
... up to 65% smaller than Fin Tube designs. Typically supplied with fan/motor but can be supplied without. All aluminum cooler core. Maximum performance with non-louvered fin design that prevents clogging. Low ...
Jabsco
Flow rate: 400, 600, 900 l/min
... Cased Industrial Chiller Features: -Compressor is used "COPELAND" brand which made in the USA.The inside safety protection can guarantee the long lasting of the chiller well.The ...
Power: 230 W
Flow rate: 6,800 m³/h
Air volume: 6800 m³/hour Air out size: 605 x 635 Water consumption: 6 – 11,5 l./H. Tension: 230 V. / 50 Hz. Consumption: 0,23 Kw. 3 speeds Water capacity: 120 l. Dimensions: 890 x 500 x 1380 mm. Noise: 56 dB. Net weight: 37 kg.
... The automatic flow inverter (patented) allows the attacking of the scales from both the inlets of the circuit and makes the machine particularly successful with almost totally bstructed pipes.
The Power Chiller, water cooling unit, monitors and controls the temperature of your device, ensuring the quality, reliability and lifespan of your equipment. The cooling method provides more thermal stability (± 0.1°C) and does not ...
Industrial Chillers ETC-Series air-cooled water chillers designed for industrial application of various industries. Built to operate in stringent ambient conditions ...
ENVISYS TECHNOLOGIES PVT LTD
Power: 100, 200, 400, 900 W
Maximum temperature: -40 °C - 70 °C
Thermoelectric Coolers or Thermoelectric Assemblies are designed to remove heat around critical components within an electrical enclosure with IP66 / NEMA4 protection category. These is a thermoelectric module (thermoelectric ...
Matching System DMCO/DMCW Cooling System Power: 3.5~7.4Kw Cooling capacity: 6000~17200kcal/h The appropriate cooling system can be selected according to different high pressure systems, which can ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining