Flow: 0.5 m³/h - 200 m³/h
Pressure: 1 MPa
Height: 7 m
... self-priming pump It adopts working principle of outer mixed self-priming pump Detail Design features ◎Design conforms to DIN24256/ISO2858 standard ◎It adopts working principle of outer mixed self-priming ...
Flow: 20 l/min - 60 l/min
Head: 10 m - 20 m
Power: 0.37, 0.55 kW
AC Fuel Ex-Proof Transfer Pump for Gasoline Refueling (YB-60FB) Product introduction: This explosion-proof fuel transfer pump is suitable for use with Gasoline,Diesel,Kerosene and Methanol. It is ...
Yongjia Jiangbei Yiben Machinery Company
Flow: 2 m³/s - 20 m³/s
Pressure: 10, 25, 16 bar
Head: 14 m - 50 m
... VFD constant Pressure Pumps are designed to start and stop over and over again without causing damage to pump's motor. It allows the motor to gradually ramp up to meet the actual flow and pressure demand ...
Zhejiang Wasinex Intelligent Technology Co., Ltd.
Flow: 3.2 l/min
The compact 2-channel pump BiVOC2V2 allows you to perform simultaneous dual air-samplings in the low volume flow range starting at 0.1 l/min. Perfectly suited for air-samplings on TENAX sample-media ...
Flow: 36, 19 m³/h
Pressure: 0 bar
Head: 14, 12 m
... the environment. • The MTX Industrie pump uses a DC brushless motor for high efficiency and reliability, it is connected to a solar generator via a controller. The controller monitors the system, controls the pump ...
MTX Industrie
Flow: 20, 30 m³/h
DESCRIPTION Powered by LUTIAN OHV, extraordinary performance and smooth operation; The pump is die-casted by ADC12 aluminum alloy; High quality ceramics, mechanical seal of silicon carbide; Convenient operation and ...
Lutian Machinery Co., Ltd.
... But, all these conventional methods are rarely used because they are time consuming, not cost effective & provide poor cleaning results & also create environmental pollution. Nowadays, wet sand blasting by high pressure ...
Flow: 3,000 m³/h
Head: 3,350 m
The ClydeUnion Pumps CUP-BB3 pump is a heavy duty axial split case horizontal, pump with opposing impellers with either single or double suction first stage impeller pumps. ...
Celeros Flow Technology
Flow: 17 m³/h
Head: 8 m
Input diameter: 40 mm
Capacity (m3 / hr) 17 Self-priming time (s / 4m) 30 Suction head (m) 8 Max discharge head (m) 55 Impeller number single Model LA178FP Type 4-storke, air cooled diesel Max output (hp / rpm) 6.0 / 3600 Displacement (cc) 296 ...
Flow: 0 l/min - 8.2 l/min
Pressure: 83 bar - 1,552 bar
... nominal pressure ratio of the pumps. when compressed air is first applied to the drive. It will start cycling at its maximum speed thus producing maximum fluid flow. At this stage, the pump is acting ...
Hydraulics International
Flow: 130 l/min
Pressure: 0.3 bar
... Life time Depends on application and medium to be pumped Medium ph-level 7 (4-11 with PP) to be tested in the application Pump housing Plastic PP glas fibre or mineral reinforced Impeller PP glas fibre reinforced Sealing ...
HANNING
... cps. The pumps are ruggedly constructed with polypropylene and polyethylene to perform in hostile conditions. Each EZI-action Drum Pump is supplied with the appropriate adapters for quick and easy installation. EZI-action ...
Trico
... shorten the time spent on it, so as the and wells' economic benefits increased, the shear pump by Kosun is performing good. The characteristics of the shear pump by Kosun: 1. Greatly enhances the hydration ...
Kosun
Flow: 0.6 l/min
Pressure: 1 bar
Power: 8.6 W
The booster pump MEPUClip® is used for the analysis of water from non-pressurized containers. It is available for our series Testomat 2000® and Titromat®. Pump installation is necessary for a water ...
Gebrüder Heyl Analysentechnik
Flow: 1,600 l/min
Head: 45 m
WP 25 is a professional water pump with hydraulic motor designed for pumping clear and muddy water with suspended solids with dimensions up to mm 20. The hydraulic functioning assures: HIGH POWER, SAFETY, RESISTANCE ...
DOA Hydraulic Tools Srl
Power: 0 kW - 55 kW
Hydraulic pump motor unit - for applications where the system requires hydraulic flow. The AC Hydraulic motor pumps are made up of an AC Motor driving a Hydraulic gear pump assembly. AC ...
Flow: 1.4 m³/h - 194.4 m³/h
Pressure: 0 Pa - 2,500,000 Pa
Head: 20 m - 230 m
... . Combined with the advantage of high pressure of multistage pump, the small occupation space of vertical pump, the easy installation of pipeline pump, and the use of ...
AOLI PUMP MANUFACTURE
Flow: 5 us gal/min - 83 us gal/min
Power: 1.5, 1, 0.33 ch
... Hayward C Series of Centrifugal Pump serves as a solution for different water service applications. It is empowered by a fully enclosed 56C frame motor constructed for an uninterrupted chemical operations. ...
Flow: 0 us gal/min - 5,000 us gal/min
The tens of thousands of pumps distributed by Smith & Loveless already, who are responsible for conveying wastewater around the world, providing reliable service every single time. The design is a bold type one, retaining ...
Smith & Loveless Inc.
Flow: 0 m³/h - 100 m³/h
Head: 8 m - 10 m
Power: 11 kW
... petrochemical products. The pumps of our manufacture present an advanced model of the pump NTsI-F-100 (НЦИ-Ф-100) previously produced in the post-Soviet countries. This is a centrifugal ...
Epos PJSC
Flow: 8, 250, 120, 45 l/min
Power: 12 W - 2,500 W
Fluid temperature: -40 °C - 120 °C
... electrified future whilst navigating the legislative complexities present in the industry today. Gates ThermalPro™ water pumps have been specifically developed to optimise energy efficiency whilst delivering performance ...
Gates® E-Cool Electric Water Pumps are manufactured for durable, worry-free operation for the life of your vehicle. Constructed using only premium materials, we rigorously function and leak test our water pumps ...
... seals, bearings, castings and fully assembled water pump. Gates water pumps fit and perform exactly to OE specifications and requirements. Gates offers engine cooling water pumps and ...
Pressure: 13.8, 10.9, 20.7, 4.5 bar
Fluid temperature: 0 °C - 343 °C
... installation and making ideal for hazardous areas. One pump design covers all applications. Pumps high temperature fluids without cavitation, reducing plant maintenance problems. Suited to ...
HYTORC HY-EX 3-Stage Electric Pumps are the backbone of an intrinsically safe bolting system. The pump is licensed to EU-Directive 2014/34/EU (Atex 100a) class: 2014/34/EU. These pumps ...
Flow: 1,800 l/h - 22,500 l/h
Head: 4.5 m - 23.5 m
Power: 60 W - 1,500 W
... solenoid-coupled centrifugal pump. Thanks to the solenoid coupling, the pump transports the liquid medium from storage tank to storage tank without any leaks or even from a tank to a ...
Flow: 2,800 l/h - 6,600 l/h
... Barrel pumps are the ideal solution for moving liquids. DULCO®Trans is used for bottling, draining and transferring liquids from canisters, hobbocks, drums, storage tanks and containers. Included in the scope of supply: ...
Flow: 0.5 us gal/min - 65 us gal/min
Pressure: 10 psi - 65 psi
Power: 120, 480, 2,500 W
... size of the pump and eliminate seals. This has resulted in pumps that are more compact while reducing leak points. These pumps are paving the way for data center cooling ...
Please specify:
Help us improve:
remaining